|
RAM Yoke Clamp Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad
Part #: RAM-B-121-TAB3U
The RAM-B-121-TAB3U consists of a double socket arm, universal diamond base, yoke clamp base and Tab-Tite™ cradle. The clamp base will accommodate rails in diameter from 0.625" to 1.25". Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ mount to your optimum viewing position.
The RAM Tab-Tite™ is compatible with the following tablets:
Apple iPad
Apple iPad 2
Apple iPad's with bumper or case including the Otterbox case
HP TouchPad
HP TouchPad's with bumper or case including the Otterbox case
Tab-Tite™ Cradle Features:
1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
|
67.90 |
|
|
RAM POD I Universal Vehicle Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad
Part #: RAM-B-316-1-TAB3
The RAM-B-316-1-TAB3 consists of a single socket arm, flex rod and Tab-Tite™ cradle. The base mounts to your seat rail without any drilling necessary. Connected to the base is a 18" rigid flexible rod that can be bent to position your device to it's optimum viewing location. The RAM POD I will hold everything you need safely and securely.
The RAM Tab-Tite™ is compatible with the following tablets:
Apple iPad
Apple iPad 2
Apple iPad's with bumper or case including the Otterbox case
HP TouchPad
HP TouchPad's with bumper or case including the Otterbox case
Tab-Tite™ Cradle Features:
1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
|
86.94 |
|
|
RAM Flat Surface Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad
Part #: RAM-B-138-TAB3U
The RAM-B-138-TAB3U consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern, diamond adapter base and Tab-Tite™ cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ cradle to your optimum viewing position.
The RAM Tab-Tite™ is compatible with the following tablets:
Apple iPad
Apple iPad 2
Apple iPad's with bumper or case including the Otterbox case
HP TouchPad
HP TouchPad's with bumper or case including the Otterbox case
Tab-Tite™ Cradle Features:
1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
|
52.04 |
|
|
RAM Suction Cup Twist Lock Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad
Part #: RAM-B-166-TAB3U
The RAM-B-166-TAB3U consists of a double socket arm, 3.25" suction cup twist lock base, diamond adapter base and Tab-Tite™ cradle. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ cradle to your optimum viewing position.
The RAM Tab-Tite™ is compatible with the following tablets:
Apple iPad
Apple iPad 2
Apple iPad's with bumper or case including the Otterbox case
HP TouchPad
HP TouchPad's with bumper or case including the Otterbox case
Tab-Tite™ Cradle Features:
1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
|
60.78 |
|
|
RAM Handlebar Rail Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad
Part #: RAM-B-149Z-TAB3U
The RAM-B-149Z-TAB3U consists of a double socket arm, zinc coated u-bolt base, diamond adapter base and Tab-Tite™ cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ cradle to your optimum viewing position. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter.
The RAM Tab-Tite™ is compatible with the following tablets:
Apple iPad
Apple iPad 2
Apple iPad's with bumper or case including the Otterbox case
HP TouchPad
HP TouchPad's with bumper or case including the Otterbox case
Tab-Tite™ Cradle Features:
1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
|
58.54 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
GDS® Vehicle Dock for Apple iPad mini 2 & 3
The RAM® vehicle dock with GDS Technology™ is a spring loaded, quick release cradle that offers a secure fit with easy access to the mounted tablet. This docking station is compatible with the Apple Ipad Mini 2/3 with IntelliSkin®.
The integrated GDS Technology™ platform enables data and charging capabilities to the mounted tablet. Without the need to remove the IntelliSkin from the device, the user can quickly and efficiently mount the device in the vehicle dock and keep the device charged.
Compatible Devices:
Apple iPad mini 2 with IntelliSkin®
Apple iPad mini 3 with IntelliSkin®
Note: This version of the GDS® vehicle dock is not recommended for light, medium or heavy duty commercial vehicles. For these use cases, please use the RAM-GDS-DOCKL-V2-AP2U.
Features:
GDS Technology™ offers a universal charging platform for any device wrapped in IntelliSkin®
Modular design makes upgrading to a new tablet simple and cost effective
Dual-spring loaded tension provides secure support for your tablet
Easy, quick release of your tablet for on-the-go applications
Versatility of holder allows for attachment to many RAM mounting solutions
Lifetime warranty, 3 year on electronics
Made in U.S.A.
Specifications:
Max power: 5V-12V @ 2A*
Material: High Strength Composite
*mUSB products supporting USB 2.0/3.0 will have a max current of 1.5A
|
6.00 |
|
|
RAM® EZ-Roll'r™ Locking Cradle for Garmin dezl™ OTR700
The RAM® EZ-Roll’r™ cradle for the Garmin dezl™ OTR700 provides a secure fit with hardware to lock the GPS device into place. With the included cradle lock as a theft deterrent, keep the Garmin dezl™ OTR700 protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPS hole pattern.
Features:
Form-fit cradle designed specifically for the Garmin dÄ“zl™ OTR700, securing your GPS while keeping all buttons and the power port fully accessible
Locks the device in place so it cannot be removed without the use of tools
Made of high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(2) #8-32 x 5/8" Machine Screws
(2) #8-32 Nylock Nuts
(2) 4" Cable Ties
Specifications:
Hole Pattern: 2-Hole AMPS: 1.912"
Materials: High Strength Composite
Weight: 0.35lbs
|
18.88 |
|
|
RAM X-Grip II
Part #: RAM-HOL-UN8BU
Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle.
The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets.
Compatible Devices:
Amazon Kindle
Amazon Kindle Fire
Archos 7
Asus EEE Pad Memo
Barnes & Noble NOOKcolor
BlackBerry PlayBook
Dell Streak 7
HTC Flyer
Panasonic Toughpad JT-B1
Samsung Galaxy Tab (7" version)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 2.25"
(Devices 2.25" in width must be a minimum of 7" in height to fit)
Maximum Width = 5.75"
Depth = 0.875"
Features:
Spring loaded holder expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the holder for quick release of your tablet
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
|
37.60 |
|
|
EZ-Roll’r™ Locking Cradle for the Garmin Fleet 770, 780 & 790
The EZ-Roll’r™ cradle for the Garmin Fleet 770/780/790 provides a secure fit with quick and easy one-handed attachment and removal of the device from the cradle. With the included cradle lock as a theft deterrent, keep the Garmin Fleet protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Locking Case Features:
Open access to all electronic ports including speaker and microphone
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Locks device in place so it cannot be removed without the use of tools
Lifetime warranty
Made in the U.S.A.
Material:
High Strength Composite
|
21.73 |
|
|
Level Cup™ XL w/Single Socket for B Size 1" Ball
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL that has an integrated single-socket arm. This cup holder can attach to any B-size base or RAM® Mounts B-size ball accessory. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.
Koozie included with purchase of this product.
Common Beverage Sizes:
12oz Cans
Water Bottles
Insulated Cups
32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask)
Material: High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag
Compatible Dimensions:
Width Range: 2.6" - 3.5"
Height Range: 3.75" - 11"
|
33.50 |
|
|
RAM TAB-TITE Universal Clamping Cradle for the iPad mini WITH CASE, SKIN OR SLEEVE
The RAM-HOL-TAB12U consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB12U is just what you need to get the most out of your tablet.
Compatible Devices:
Apple iPad mini WITH CASE, SKIN, SLEEVE
Apple iPad mini (with Retina display) WITH CASE, SKIN, SLEEVE
The Tab-TiteT cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Tab-Tite Cradle Dimensions:
Height: 6.80" minimum to 9" maximum
Width: Maximum width to 5.68"
Depth: 0.125" minimum to 1" maximum
Tab-Tite Cradle Features:
Support cups contain open slots to accommodate for tablets of various sizes
Back plate can support various size support cups
Spring loaded tension provides secure support for your tablet
Spring loaded cradle allows for quick release of your tablet
High strength materials maximize longevity of cradle
Full access to all ports
Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.38 |
|
|
RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge Cases
The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet.
The RAM Tab-Tite cradle is compatible with the following tablets:
10" Screen Tablets with LifeProof nüüd cases
10" Screen Tablets with Lifedge cases
10" Screen Tablets with heavy duty cases
The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Tab-Tite Cradle Dimensions:
Height: 8.75" minimum to 10.75" maximum
Width: maximum to 8.25"
Depth: maximum to 1.1"
Tab-Tite Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
27.61 |
|
|
RAM Universal Large Tab-Tite Holder f/10" Screen Tablets
Part #: RAM-HOL-TAB-LGU
Get the most out of your tablet with the Universal RAM Tab-Tite™ cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.
The Tab-Tite™ is compatible with the following tablets WITH OR WITHOUT SKINS, SLEEVES OR CASES:
Apple iPad & iPad 2
Asus EEE Pad
Asus Eee Pad Transformer
HP TouchPad
Lenovo LePad Slate
LG G-Slate
LG Optimus Pad
Motorola XOOM
Pandigital R90A200
Samsung Galaxy 10.1
Toshiba Thrive
Most 10" Screen Tablets
Included With Purchase:
(1) Spring loaded back plate
(2) Support cups for thin tablets
(2) Support cups for wide tablets
Mounting hardware
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
Cradle Dimensions:
Height: 8.5" minimum to 10.75" maximum
Width: Maximum to 7.75"
Edge Depth: Maximum to 0.56"
Cradle Dimensions:
Height: 8.25" minimum to 10.75" maximum
Width: Maximum to 6.8"
Edge Depth: Maximum to 0.50"
Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Material:
High Strength Composite
|
34.40 |
|
|
Double Twist-Lock™ Suction Cup Mount w/Tab-Tite™ Universal Spring Loaded Cradle f/Apple iPad 1-4 with or without Light Duty Case
The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Cradle Dimensions:
Height: 8.5" to 11.125"
Width: 6.38" to 7.75"
Depth: 0.13" to 0.56"
Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
8. Made in the U.S.A.
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
1.8 lbs.
|
79.37 |
|