Universal No-Drill RAM Pod HD Vehicle Mount w/Double Socket Arm & 2.5" Round Base (AMPS Hole Pattern) Pole Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Universal No-Drill™ RAM POD HD™Vehicle Mount with Double Socket Arm & 2.5" Round Base AMPs Hole Pattern Blending the best of versatility, strength and installation ease; the RAM POD HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM POD HD™is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM POD HD™ makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet. Pole Length: Minimum: 18.75” Maximum: 25.75” Features: Low Profile, Low Cost and Extremely Robust: - The minimalist design offers a low profile form factor while offering an extremely robust mounting platform - Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications Highly Versatile: - Angle adjustment feature to compensate for varying floorboard angles - Can be used as a horizontal or vertical flat surface drill-down mount - aluminum post can be cut to size in order to accommodate varying vehicle configurations Easy to Install and Remove: - Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle - Attaches using an existing seat rail bolt or seat track - Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 5.15 lbs.

RAM Stainless Steel Double U-Bolt Base with 1.5" Ball for Rails from 1" to 1.25" in Diameter The RAM-235U consists of a stainless steel double u-bolt base connected to a 1.5" diameter ball. The double u-bolt base will accommodate rails from 1" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.

RAM Seat Tough-Wedge with 1" Ball Base & Standard Length Double Socket Arm The RAM-B-407-201U consists of the Tough-Wedge™ and standard length double socket arm. The Tough-Wedge™ is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. The standard length double socket arm measures 3.68" and will connect to all RAM cradles/adapters with a 1" ball. Tough-Wedge™ Dimensions: Length: 13.25" Height: 8.25" Depth: 1" Inside Wedge Depth: 0.375" - 0.875"

Universal X-Grip® Cradle with 1" Ball & STANDARD Length Double Socket Arm for 7" Tablets Consists of a STANDARD length double socket arm and universal X-Grip® clamping cradle for 7" tablets. The double socket arm is 3.69" in length and will accept all RAM 1" diameter ball bases. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 7" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" Specs & Features Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Includes Tether for open cockpit and extreme environments Lifetime warranty Rustproof Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.5 lbs. Compatible Devices: 7" Screen Tablets Amazon Kindle Fire Amazon Kindle Fire HD Amazon Kindle Fire HDX Apple iPad mini Apple iPad mini 2 Apple iPad mini 3 Apple iPad mini 4 Nexus 7 Samsung Galaxy Tab 2 7.0 Samsung Galaxy Tab 3 7.0 Samsung Galaxy Tab 4 7.0 Samsung Galaxy Tab A 8.0 Samsung Galaxy Tab S2 8.0 Samsung Galaxy Tab S 8.4

RAM 18" Long Extension Pole with (2 qty) 1" Diameter Ball Ends, and Double Socket Arm The RAP-BB-230-18-201U consists of a LONG extension pole with (2 qty) 1" diameter ball ends and double socket arm. Dimensions: Overall Length (Arm Socket to Ball End): 18" Pole Length (Ball End to Ball End): 16.75" Features: 1. Extension poles are buoyant, will float if dropped in the water 2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications 3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use 4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch 5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments 6. Lifetime warranty 7. Made in USA Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM-A-CAN™ II Universal Cup Holder Base with Double Ball Mount The RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN™ II cup holder base. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The RAM-A-CAN™ II cup holder base serves as a mounting point for the diamond base. Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5". Specifications: Material: High Strength Composite Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag

RAM Quick Release Adapter with 1.5" Diameter Ball for "Rugged Use" Lowrance Elite-5 & Mark-5 Series Fishfinders The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Compatible Devices: Lowrance Elite-5 Lowrance Elite-5 DSI Lowrance Elite-5 Gold Lowrance Elite-5x Lowrance Elite-5x DSI Lowrance Elite-5m Lowrance Elite-5m Gold Lowrance Mark-5x Lowrance Mark-5x DSI Lowrance Mark-5x DSI Portable Lowrance Mark-5x Pro Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends this adapter base for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders. RAM Double Socket Arm for 1.5" Ball Bases The RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 5.625" Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" Ball The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

Instant Brass & Copper Tarnish Remover Natural Organic salts formula Instantly Removes heavy tarnish without rubbing. Safer than traditional acid-based cleaners. Just spray & rinse. Use Indoors or Out. Instantly removes: Heavy tarnish, Rust & corrosion, Calcium deposits & stains, Heavy oxidation, Water spots & stains Safe on: Glass, aluminum, painted surfaces, fiberglass, stucco, brick, porcelain, brass & copper. Works great on heavy tarnish, rust & corrosion, calcium deposits & stains, heavy oxidation, water spots & stains. Not for: Chrome or Patina finishes. WARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause reproductive harm, and 1, 4-Dioxane which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

ActiveLink SE Series Bike Rack - 4 Bikes Up to 180 lbs The ActiveLink SE bike rack is all about bringing maximum confidence and convenience to an active, outdoor lifestyle. It is built around the revolutionary ActiveLink technology from CURT, a hitch-mounted system that allows for fast, easy, and secure attachment of hitch accessories like never before. This model transports up to four bikes at once and is rated to hold up to 180 lbs. Unlike a traditional hitch connection that requires users to get down on their hands and knees and feel around grimy components to line everything up, this bike rack features the ActiveLink shank. Simply install the shank one time in a receiver, and users can swap out accessories in a flash. The shank features a bottom bolt that provides a resting point for the accessory attachment, perfectly lining up the hitch pin holes for an effortless connection. Drop in the bike rack whenever users need it or swap it out in a snap. It’s that easy. The ActiveLink 4-bike rack from CURT is constructed from high-strength steel and provides space to hang up to two bikes at one time. The rubber cradles and rubber bumper on the vertical support tube keep the bikes secure while protecting the frames from scuffs and scratches. The rack also has a tilt-away pivot point for convenient access to a vehicle's rear cargo area, and the arms of the rack fold down as needed for compact storage. To help protect this CURT bike rack from the elements, it comes with a dual finish of A-coat and a durable black powder coat. Features: Patent-pending ActiveLink design for fast, secure attachment with pin and clip The unique connection allows users to easily swap out accessories as needed Shank provides an integrated resting point for struggle-free installation Securely holds up to two bikes with a max weight capacity of 180 lbs. Rubber bumper pad on vertical support tube to protect from scuffs and scratches Adjustable rubber cradles to accept various frame tube sizes Tilt-away feature for easier access to the vehicle cargo area Arms fold down when not in use for compact storage Anti-rattle hitch pin and anti-rattle hand wheel for reduced noise Plastic lining on the shank helps suppress vibration Integrated handle for easy removal and carrying Built-in reflectors on the ends of the arms for increased visibility Steel construction with dual E-coat and carbide black powder coat finish Limited lifetime warranty (one-year finish, one-year parts) Notes: Includes bike rack and shank (compatible with ActiveLink shank only) For use with any frame-mounted 2" class 3 or higher trailer hitch receiver. Clamp-on bumper receivers and traditional 4" square bumpers should not be used to mount bike racks. Do not exceed receiver weight limits. Specifications: Finish: Black Powder Coat  Hub Warehouse: D25 Installation Time (Exact): 0 Material: Carbon Steel Mount Type Description: Not applicable Number of Bikes: 4 Product Weight: 36.9 lbs. Receiver Tube Size: 2 in. Warranty: Limited Lifetime warranty (one-year finish, one-year parts)

ActiveLink Ultra Series Bike Rack - 4 Bikes Up to 180 lbs The ActiveLink Ultra bike rack is all about bringing maximum confidence and convenience to an active, outdoor lifestyle. It is built around the revolutionary ActiveLink technology from CURT, a hitch-mounted system that allows for fast, easy, and secure attachment of hitch accessories like never before. This model transports up to four bikes at once and is rated to hold up to 180 lbs. It can also be used in a two-bike configuration. Unlike a traditional hitch connection that requires users to get down on their hands and knees and feel around grimy components to line everything up, this bike rack features the ActiveLink shank. Simply install the shank once in a receiver, and users can swap out accessories in a flash. The shank features a bottom bolt that provides a resting point for the accessory attachment, perfectly lining up the hitch pin holes for an effortless connection. Drop in the bike rack whenever users need it or swap it out in a snap. It’s that easy. The ActiveLink 4-bike rack from CURT is constructed from high-strength steel and provides space to hang up to four bikes at one time. The underslung design allows the bike to easily be lifted onto the cradles from underneath with no threading needed, and the tiered, ascending configuration provides more clearance for the outer bikes. The premium cradles and rubber bumper on the vertical support tube keep the bikes secure while protecting the frames from scuffs and scratches. The rack also has a tilt-away pivot point for convenient access to a vehicle's rear cargo area, and the arms of the rack fold down as needed for compact storage. To help protect this CURT bike rack from the elements, it comes with a dual finish of A-coat and a durable black powder coat. Features: Patent-pending ActiveLink design for fast, secure attachment with pin and clip Unique connection that allows users to easily swap out accessories as needed Shank provides an integrated resting point for struggle-free installation Bikes can easily be lifted onto cradles from underneath – no threading needed Tiered ascending configuration improves clearance for outer bikes Flip-back arm allows for better accessibility when loading inner bikes Usable in 2-bike or 4-bike configuration (180 lbs. max weight capacity) Rubber bumper pad on vertical support tube to protect from scuffs and scratches Premium cradles accept various frame tube sizes Tilt-away feature for easier access to the vehicle cargo area Upper arms fold down when not in use for compact storage Anti-rattle hitch pin and plastic lining on the shank for reduced noise Integrated handle for easy removal and carrying Steel construction with dual E-coat and carbide black powder coat finish Limited lifetime warranty (one-year finish, one-year parts) Notes: Includes bike rack and shank (compatible with ActiveLink shank only) For use with any frame-mounted 2" class 3 or higher trailer hitch receiver. Clamp-on bumper receivers and traditional 4" square bumpers should not be used to mount bike racks. Do not exceed receiver weight limits. Specifications: Finish: Black Powder Coat  Hub Warehouse: D25 Installation Time (Exact): 0 Material: Carbon Steel Max Load: 180 lbs. Mount Type Description: Not applicable Number of Bikes: 4 Receiver Tube Size: 2 in. Warranty: Limited Lifetime warranty (one-year finish, one-year parts)

ROKK Mini Camera Mount Standard 1/4" thread mount for digital and action cameras.   *Camera not included Compatible with: Any brand camera using standard 1/4-20 UNC thread *Sold as an Individual

BURKS GNB6-1-1/2-6.25 CENTRIFUGAL PUMP BURKS Model: GNB6-1-1/2-6.25 Burks Frame Mounted End Suction GNB Series Pump Bronze Fitted, 6.25" Bronze Impeller 2" Suction & 1 1/2" Discharge Carbon / Ceramic / SS Buna-N Shaft Seal Maximum Temperature of 225°F (107°C) Application: Waste Treatment and Plating   Ships Via Truck please us the Contact Us page to get a Freight Quote.

U-Bolt ATV UTV Strap with Double Socket Arm and 1/4-20 Mounting Bolt Base Part #: RAM-B-149Z-2-202A RAM Rail ATV/UTV Mount for Cameras Color: Black Powder Coat Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball

D Size 2.25" Ball on Round Plate with AMPS Hole Pattern The RAM-D-254U consists of a 2.25" diameter rubber ball, connected at right angles to a 2.4375" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.6 lbs.