RAM Universal X-Grip III Tablet Holder for Large Tablets including the Apple iPad, iPad 2, iPad 3, iPad HD, Motorola XOOM & Motorola XOOM 2 - Includes Yoke Mount The new RAM X-Grip III line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip III leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you. The X-Grip III consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The X-Grip III expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip III. Compatible Devices: Apple iPad Apple iPad 2 Apple iPad 3 Apple iPad HD Asus EEE Pad Asus Eee Pad Transformer HP TouchPad Lenovo LePad Slate LG G-Slate LG Optimus Pad Motorola XOOM Motorola XOOM 2 Pandigital R90A200 Samsung Galaxy Tab 8.9 Samsung Galaxy Tab 10.1 Toshiba Thrive Most 10" Screen Tablets All devices that maintain the following dimensions below: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet 6. Multiple mounting access points on the back of the holder 7. Additional support keeper at the bottom of the holder 8. Will not interfere with electronic ports, speakers and camera Material: High Strength Composite with Rubber Tips Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Universal X-Grip III Tablet Holder for Large Tablets including the Apple iPad, iPad 2, iPad 3, iPad HD, Motorola XOOM & Motorola XOOM 2 Part #: RAM-HOL-UN9U The new RAM X-Grip III line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip III leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you. The RAM-HOL-UN9U consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip III. Compatible Devices: Apple iPad Apple iPad 2 Apple iPad 3 Apple iPad HD Asus EEE Pad Asus Eee Pad Transformer HP TouchPad Lenovo LePad Slate LG G-Slate LG Optimus Pad Motorola XOOM Motorola XOOM 2 Pandigital R90A200 Samsung Galaxy Tab 8.9 Samsung Galaxy Tab 10.1 Toshiba Thrive Most 10" Screen Tablets All devices that maintain the following dimensions below: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet 6. Multiple mounting access points on the back of the holder 7. Additional support keeper at the bottom of the holder 8. Will not interfere with electronic ports, speakers and camera Material: High Strength Composite with Rubber Tips Note: The "U" in the part number reflects product packaged in poly bag.

RAM Flat Surface Mount® with Long Double Socket Arm & Universal X-Grip® III Holder For Large Tablets The RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal X-Grip® III clamping cradle for 10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III. X-Grip® III Cradle Dimensions: Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Maximum Length (using additional supports) = 10.25" X-Grip® III Cradle Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of cradle allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 6. Multiple mounting access points on the back of the cradle 7. Additional support keeper at the bottom of the cradle 8. Full access to all ports 9. Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite

RAM Pod I Universal No-Drill Vehicle Mount w/Universal X-Grip III Holder f/Large Tablets The RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill® vehicle base, 18" rigid aluminum rod, socket system and universal X-Grip® III clamping cradle for 10" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III. The RAM X-Grip® III cradle is compatible with the following tablets WITH OR WITHOUT CASE: Apple iPad Air Apple iPad 4 (With Lightning Connector) Apple iPad 3 Apple iPad 2 Apple iPad 1 HP TouchPad Asus EEE Pad Asus Eee Pad Transformer Lenovo LePad Slate & IdeaTab Lynx LG G-Slate LG Optimus Pad Microsoft Surface Motorola XOOM Motorola XYBOARD 10.1 Samsung Galaxy Tab 8.9 Samsung Galaxy Tab 10.1 Samsung Galaxy Tab 2 10.1 Samsung Galaxy Tab 3 10.1 Toshiba Thrive Most 10" Screen Tablets X-Grip® III Cradle Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of cradle allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 6. Multiple mounting access points on the back of the cradle 7. Additional support keeper at the bottom of the cradle 8. Full access to all ports 9. Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Note: The RAM-B-316-1-UN9 is not compatible with the Apple iPad with LIFEPROOF NUUD CASE

RAM Universal X-Grip® II Tablet Holder with 1.5" Ball for 7'' Tablets including the iPad mini 1-3 The RAM-HOL-UN8BCU consists of a spring loaded holder and 1.5" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BCU expands and contracts for perfect fit of most 7" tablets. The X-Grip® holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 2.25" Maximum Width = 5.75" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many RAM 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet 6. Rustproof 7. Lifetime warranty 8. Made in U.S.A. Material: Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1.5" Rubber Ball Size

RAM Universal X-Grip IV Large Phone/Phablet Holder with 1" Ball The X-Grip IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip IV is the phablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phablet and become the most useful accessory in your vehicle. Compatible Devices: HTC Droid DNA Huawei Ascend P1 LG Intuition Nokia Lumia 920 Pantech Vega No. 6 Samsung GALAXY Note II Samsung GALAXY S III The X-Grip IV holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 1.75" Maximum Width = 4.5" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Versatility of holder allows for attachment to many RAM ball mounts 6. Lifetime warranty Material: High Strength Composite & Stainless Steel Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Universal X-Grip Holder f/12" Tablets The new RAM X-Grip line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you. The RAM-HOL-UN11U holder expands and contracts for perfect fit of most 10" and 12" tablets with or without sleeves, as well as some smaller tablets. This holder by RAM consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper. ** The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY. ** Compatible Devices (WITH OR WITHOUT CASE):  Microsoft Surface Pro 3 Samsung Galaxy Note® Pro 12.2 Most 12" Screen Tablets X-Grip Holder Dimensions: Minimum Width = 7.25" Maximum Width = 8.75" Maximum Length (WITHOUT additional supports) = Unlimited Maximum Length (WITH additional supports) = 10.25" Depth = 0.875" X-Grip Holder Features: Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Versatility of cradle allows for attachment to many 1" socket mounts Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Multiple mounting access points on the back of the cradle Additional support keeper at the bottom of the cradle Full access to all ports Lifetime warranty Made in the U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

Twist-Lock™ Suction Cup Mount with Universal X-Grip® Cradle for 12" Large Tablets The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY. The RAM-B-166-UN11U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip® clamping cradle for 12" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® clamping cradle expands and contracts for perfect fit of most 12" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 7.25” Maximum Width = 8.75” Maximum Length (WITHOUT additional supports) = Unlimited Maximum Length (WITH additional supports) = 10.25” Depth = 0.875" Features: Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Multiple mounting access points on the back of the cradle Additional support keeper at the bottom of the cradle Full access to all ports Lifetime warranty Material: Powder Coated Marine Grade Aluminum and Marine Grade Stainless Steel Components Note: The "U" in the part number reflects product packaged in poly bag.

Universal X-Grip® Cradle with 1" Ball & STANDARD Length Double Socket Arm for 7" Tablets Consists of a STANDARD length double socket arm and universal X-Grip® clamping cradle for 7" tablets. The double socket arm is 3.69" in length and will accept all RAM 1" diameter ball bases. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 7" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" Specs & Features Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Includes Tether for open cockpit and extreme environments Lifetime warranty Rustproof Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.5 lbs. Compatible Devices: 7" Screen Tablets Amazon Kindle Fire Amazon Kindle Fire HD Amazon Kindle Fire HDX Apple iPad mini Apple iPad mini 2 Apple iPad mini 3 Apple iPad mini 4 Nexus 7 Samsung Galaxy Tab 2 7.0 Samsung Galaxy Tab 3 7.0 Samsung Galaxy Tab 4 7.0 Samsung Galaxy Tab A 8.0 Samsung Galaxy Tab S2 8.0 Samsung Galaxy Tab S 8.4

RAM Mount Universal X-Grip Holder Yoke Glare Mount Part #: RAP-B-121-UN7U RAM Composite Clamp Mount with Universal X-Grip™ Holder. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality composite materials insure your device is safe, secure, and within easy reach. The clamp base fits a rail or edge lip from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base. Extra ball not included with purchase of this mount. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cradle w/1" Ball f/7" Tablets The RAM-B-400-C-UN8U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for 7" tablets. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" X-Grip® Cradle Dimensions Minimum Width = 2.25" Maximum Width = 5.75" Depth = 0.875" Specifications/Features: Rustproof Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: RAM Highly Recommends adding a secondary tethering device for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag.

Twist-Lock™ Suction Cup Mount w/Universal X-Grip® Cradle for 10" Large Tablets The RAM-B-166-UN9U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip® clamping cradle for 10" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 6.25" Maximum Width = 8.1" Depth = 0.875" Features: Spring loaded cradle expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the cradle for quick release of your tablet Multiple mounting access points on the back of the cradle Additional support keeper at the bottom of the cradle Full access to all ports Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

Small Tough-Claw™ Base with Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle The RAM-B-400-UN7 consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Features: Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25"), Maximum Width = 3.25" (Minimum Height = 2.25"), Depth = 0.875" Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.95 lbs.

Dual Articulating Suction Cup w/Medium Length Double Socket Arm & Universal X-Grip® Cradle f/12" Large Tablets The RAM-B-189-PIV1-UN11U consists of a dual articulating 3.3" twist lock suction cup base, double socket arm, and universal X-Grip® cradle for 12" Tablets. The dual articulating suction cup base is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® cradle is compatible with devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 7.25” Maximum Width = 8.75” Maximum Length (WITHOUT additional supports) = Unlimited Maximum Length (WITH additional supports) = 10.25” Depth = 0.875" Features: Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 2.45 lbs. *The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY.

RAM Universal X-Grip Holder Brake/Clutch Reservoir Mount Part #: RAM-B-174-UN7 The RAM-B-174-UN7 consists of a double socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter and universal X-Grip™ cell phone holder. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the cell phone holder to your optimum viewing position. The spring loaded X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. X-Grip™ Holder Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable X-Grip™ Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: Note: Part number reflects product packaged in clear clam shell for store shelf display. To see if the RAM-B-174-UN7 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".