Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM Tab-Tite Universal Clamping Cradle for 10" Screen Tablets WITH OR WITHOUT HEAVY DUTY CASES Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. The RAM Tab-Tite universal clamping cradle is compatible with the following tablets & cases: 10" Screen Tablets with or without heavy duty cases 10" Screen Tablets with OtterBox Defender cases 10" Screen Tablets with Gumdrop Drop Tech cases 10" Screen Tablets with Griffin Technology cases 10" Screen Tablets with Belkin cases Many More! The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Maximum Width = 8.12" Length Range = 8.5" to 10.5" Maximum Depth = 1.12" Features: Support cups contain open slots to accommodate for tablets of varying dimensions Spring loaded for ease of removal and insertion of your tablet Full access to all ports Customize height of holder for your tablet Best usage in low vibration environments Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Hardware included to attach to mount.

Tab-Tite™ Drill-Down Mount with Backing Plate for Small Tablets This mount consists of a 2.10" x 2.60" backer plate, double socket arm, round base adapter, and Tab-Tite™ universal clamping cradle. The spring-loaded Tab-Tite™ cradle makes it easy to load and unload your tablet while keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet. By allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that fits the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Height Range: 7.375" - 10", Width Range: 4" - 5.31", Depth Range: .13" - 1.06" Socket to Socket Length (inch): 3” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum, high-strength composite, and steel Weight: 1.2 lb.

RAM Yoke Clamp Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-121-TAB3U The RAM-B-121-TAB3U consists of a double socket arm, universal diamond base, yoke clamp base and Tab-Tite™ cradle. The clamp base will accommodate rails in diameter from 0.625" to 1.25". Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ mount to your optimum viewing position. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

X-Grip® Dashboard Mount with Backing Plate for 9"-10" Tablets The RAM® X-Grip® universal holder for 9"-10" tablets features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Included are easy-access grip knobs located on the back of the holder for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allow for near-infinite adjustability to achieve the ideal viewing angle while also extending the life of your tablet by providing shock and vibration damping. The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. Features: Spring-loaded 'X' design with rubber caps sports great holding power without obstructing your tablet; fits most 9 in. -10 in. tablets Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders 2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases Made of high-strength composite and steel components for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Max Height: 10.25" (using optional supports), Width Range: 6.25" - 8.1", and Max Depth: .875" Socket to Socket Length (inch): 2.5” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Plate Size (inch): 2.5" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum and high-strength composite Weight: 2.42 lb. Compatible Devices: Amazon: Fire HD 10 Apple: iPad (1st Generation), iPad (3rd Generation), iPad (4th Generation), iPad (5th Generation), iPad (6th Generation), iPad (7th Generation), iPad (8th Generation), iPad (9th Generation), iPad (10th Generation), iPad 2, iPad 9.7 (2017), iPad 9.7 (2018), iPad Air, iPad Air 2, iPad Air 3, iPad Air 4, iPad Air 5, iPad Pro 9.7 (1st Generation), iPad Pro 10.5 (2nd Generation), iPad Pro 11", iPad Pro 11" (2020), iPad Pro 11" (2021), and iPad Pro 11" (2022) ASUS: MeMO Pad FHD 10, Transformer Pad, ZenPad 10, ZenPad 3S 10, and ZenPad Z10 Dell: Venue 10 7000, Venue 11 Pro, and Venue 11 Pro 7000 Google: Nexus 10 and Pixel C HP: ElitePad 900, ElitePad 900 G1, Pro 610, and Pro Slate 10.1 Huawei: MediaPad M2 10.0, MediaPad M3 Lite 10.0, and MediaPad T3 10 Lenovo: Miix 3, Tab P12 Pro, S6000, Tab 2 A10-70, Tab 4 10, Tab 4 10 Plus, Tab A10, Tab3 10 Business, ThinkPad 10, ThinkPad Tablet 2, Yoga Book, Yoga Tab 3 10, Yoga Tab 3 Pro, Yoga Tablet 10, Yoga Tablet 10 HD+, and Yoga Tablet 2 (10 inches) LG: G Pad 10.1, G Pad II 10.1, G Pad X 10.1, and G Pad X II 10.1 Microsoft: Surface 2, Surface Pro, Surface Pro 2, Surface Go, and Surface Go 2 Nokia: T21 Samsung: Galaxy Book 10.6, Galaxy Tab 10.1, Galaxy Tab 2 10.1, Galaxy Tab 3 10.1, Galaxy Tab 4 10.1, Galaxy Tab A 9.7, Galaxy Tab A 10.5, Galaxy Tab A8 10.5, Galaxy Tab Active Pro, Galaxy Tab Active4 Pro, Galaxy Tab Pro 10.1, Galaxy Tab S 10.5, Galaxy Tab S2 9.7, Galaxy Tab S3 9.7, Galaxy Tab S4 10.5, Galaxy Tab S5e, Galaxy Tab S6, Galaxy Tab S7, Galaxy Tab S7 FE, Galaxy Tab S7 Plus, Galaxy Tab S8, and Galaxy Tab S8 Plus Sony: Vaio Tap 11, Xperia Tablet S, and Xperia Tablet Z Vankyo: MatrixPad Z4 10" Zebra: ET50 10" and ET55 10"

RAM® X-Grip® with RAM® Pod™ I Vehicle Mount for 12" Tablets The RAM-B-316-1-UN11U consists of the RAM POD I universal No-Drill® vehicle base, 18” rigid aluminum rod, socket system and universal X-Grip® clamping cradle for 12" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip® clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Gripclamping cradle expands and contracts for perfect fit of most 12" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip®. The X-Grip® cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY. Features: Universal vehicle mount attaches to seat rail without any drilling necessary; 18" aluminum rod can be bent to your ideal position Spring-loaded 'X' design with rubber caps sports great holding power without hiding your tablet; fits most 12" tablets Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Holder Dimensions: Max Height: 10.25" (using optional supports), Width Range: 7.25" - 8.75", Max Depth: .875"  Ball/Socket Size: B Size (1") Materials: Marine-grade aluminum, High strength composite

RAM X-Grip II Part #: RAM-HOL-UN8BU Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle. The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets. Compatible Devices: Amazon Kindle Amazon Kindle Fire Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Panasonic Toughpad JT-B1 Samsung Galaxy Tab (7" version) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 2.25" (Devices 2.25" in width must be a minimum of 7" in height to fit) Maximum Width = 5.75" Depth = 0.875" Features: Spring loaded holder expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the holder for quick release of your tablet Material: High Strength Composite with Rubber Tips Ball Size: 1" Rubber Ball "B" Size

RAM® Tab-Lock™ Tablet Holder for 10" Tablets with Case + More  The RAM® Tab-Lock™ spring-loaded, quick-release cradle with a keyed lock offers a secure fit with easy access to the mounted tablet. The keyed lock offers theft deterrence and unwanted tampering in public settings. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 10.1 and Tab S 10.5 with an Otterbox Defender case, but also support many other tablet models and industrial tablet PCs. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various-size support cups, making it compatible with numerous tablet models. The detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. A set of four nuts and bolts is included to connect the cradle to any RAM components or mounts that contain the universal AMP hole pattern. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. The product consists of a holder only. Case not included. Features: Locking mechanism for theft deterrence Support cups contain open slots to accommodate tablets of various sizes The back plate can support various sizes of cups Spring-loaded tension provides secure support and quick release for your tablet Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (2) #8 x 5/8" Sheet Metal Screws, (2) M4 x 32mm Machine Screws, (2) M4 Nylock Nuts, (2) Keys Holder Dimensions: Height Range: 9.64" - 12.32", Width Range: 6.13" - 7.4", Depth Range: .13" - .7" Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" Materials: High-strength composite Packaging Type: Poly Bag Weight: 1.25 lbs

Sunskiff 2-Person Inflatable Boat The ideal inflatable boat for pools, lakes, and more! Features: 360 lbs max capacity Heavy-duty PVC construction Grab lines Integrated oar locks

Sunskiff 3-Person Inflatable Boat The ideal inflatable boat for pools, lakes, and more! Features: 525 lbs max capacity Heavy-duty PVC construction Grab lines Integrated oar locks

RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and X-Grip® for 7-8" Tablets Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball that accommodates bars 1 1/8" to 1 ½” in diameter with a B-sized standard length arm and the dynamic X-Grip® for 7”-8” tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Mounting Base Dimensions: Accommodates rails 1 1/8” to 1 1/2” in diameter Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Socket technology allows for multiple adjustment angles and articulation of your tablet 4. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 5. Includes Tether for open cockpit and extreme environments 6. Lifetime warranty 7. Rustproof 8. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: RAM highly recommends using the provided Tether for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag. Weight: 0.86 lbs.

RAM Universal X-Grip® Cell Phone Holder Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Features: Spring loaded holder expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Versatility of holder allows for attachment to many RAM-to-RAM ball mounts Single socket technology allows for multiple adjustment angles and articulation of device Compatible Cases/Skins/Bumpers: Artwizz Ballistic Belkin BodyGlove Case-Mate DragonFly Ed Hardy FishBone G-Mate Griffin iFrogz iLuv InCase Incipio Inspiretech iSkin Ivyskin Krusell Luxmo Mobo Monaco Oakley Otterbox Seidio SolidColors Speck SwitchEasy Talon Cases TPhone Trident TurtleBack Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Material: High Strength Composite with Rubber Tips

No-Drill™ Laptop Base f/ '97-16 Ford F-250, F-350, F-450, F-550, F-650, F-750 & Excursion The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Compatible Vehicles: F-250 (1997-2016) F-350 (1997-2016) F-450 (1997-2016) F-550 (1997-2016) F-650 (1997-2018) F-750 (1997-2018) Excursion (2000-2005) Placement of Mount:  Passenger side floor board, in front of seat DRILLING REQUIREMENTS: No - attaches to seat studs Seat Configuration:  Bucket Pole:  Purchased Separately Material: Powder Coated Steel

NavGrip XL Dash & Window Mount The NavGrip XL Dash & Window Mount is the perfect solution for mounting your large GPS or tablet when you're on the go.The sturdy, low-profile mount safely and securely holds your device in landscape or portrait mode for hands-free navigational use while driving. Desription: Universal design safely allows you to mount your 7" GPS or tablets up to 10" for front seat navigational use Heavy-duty, low vibration mount safely and securely holds your device while allowing full access to all device buttons and controls Mounts directly to most hard or textured surfaces, including your windshield Features: 360 Rotation Angle Adjustments Temporbond WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM® No-Drill™ Mount for '97-16 Ford F-250 - F750 + More This RAM® No-Drill™ mounting system installs quickly and easily into a range of Ford F-Series and Ford Excursion vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. The round ball base attached to the end of the swing arm supports a variety of tablet and laptop holders, while RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. Features: RAM® No-Drill™ base offers low-profile mounting; telescoping pole allows for height adjustments Dual articulating swing arm allows for ideal device placement; compatible with a variety of tablet and laptop holders Made of powder-coated steel and marine-grade aluminum Backed by a lifetime warranty Plate Size: 2.5" Diameter Ball/Socket Size: C Size (1.5") Materials: Powder coated steel, Marine grade-aluminum Hardware Included: Assembly Hardware (2) M12-1.75 x 100mm Hex Bolts (2) M12-1.75 x 60mm Hex Bolts (2) M12 Lock Washers (2) 3/8" Stand-Offs (2) 1" Stand-Offs Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" 3-Hole 120-Degree: 1.812" Diameter Seat Bolt Distance: 11.5" center to center