Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter The RAM-B-166U, twist lock suction cup mount consists of a 3.25" suction cup locking base and diamond plate end. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment point at the cradle plate and base. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your iPhone in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your iPhone is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device. Overall Length: 6.75" Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM Tab-Lock Universal Locking Cradle f/Apple iPad w/LifeProof & Lifedge Cases The RAM-HOL-TABL17U consists of a spring loaded back plate, custom support cups and locking mechanism. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad secure and safe from theft. The RAM Tab-Lock cradle is compatible with the following tablets: 10" Screen Tablets with LifeProof nüüd cases 10" Screen Tablets with Lifedge cases 10" Screen Tablets with heavy duty cases Tab-Lock Cradle Dimensions: Height: 8.75" minimum to 10.75" maximum Width: maximum to 8.25" Depth: maximum to 1.1" Tab-Lock Cradle Features: 1. Locking mechanism for theft deterrence 2. Support cups contain open slots to accommodate for tablets of various sizes 3. Back plate can support various size support cups 4. Spring loaded tension provides secure support for your tablet 5. Spring loaded cradle allows for quick release of your tablet 6. High strength materials maximize longevity of cradle 7. Full access to all ports 8. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount Tab-Tite™ Cradle for the Apple iPad Air 1-2 & 9.7" Tablets w/Case, Skin or Sleeve Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Features: Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves Back plate can support various size support cups Spring loaded tension provides secure support for your tablet Spring loaded cradle allows for quick release of your tablet Full access to all ports Material:High Strength Composite Note:The "U" in the part number reflects product packaged in poly bag. Weight:0.65 lbs.

RAM® Tab-Lock™ Tablet Holder for 10" Tablets with Case + More  The RAM® Tab-Lock™ spring-loaded, quick-release cradle with a keyed lock offers a secure fit with easy access to the mounted tablet. The keyed lock offers theft deterrence and unwanted tampering in public settings. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 10.1 and Tab S 10.5 with an Otterbox Defender case, but also support many other tablet models and industrial tablet PCs. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various-size support cups, making it compatible with numerous tablet models. The detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. A set of four nuts and bolts is included to connect the cradle to any RAM components or mounts that contain the universal AMP hole pattern. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. The product consists of a holder only. Case not included. Features: Locking mechanism for theft deterrence Support cups contain open slots to accommodate tablets of various sizes The back plate can support various sizes of cups Spring-loaded tension provides secure support and quick release for your tablet Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (2) #8 x 5/8" Sheet Metal Screws, (2) M4 x 32mm Machine Screws, (2) M4 Nylock Nuts, (2) Keys Holder Dimensions: Height Range: 9.64" - 12.32", Width Range: 6.13" - 7.4", Depth Range: .13" - .7" Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" Materials: High-strength composite Packaging Type: Poly Bag Weight: 1.25 lbs

RAM Tab-Tite Universal Clamping Cradle for 10" Screen Tablets WITH OR WITHOUT HEAVY DUTY CASES Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. The RAM Tab-Tite universal clamping cradle is compatible with the following tablets & cases: 10" Screen Tablets with or without heavy duty cases 10" Screen Tablets with OtterBox Defender cases 10" Screen Tablets with Gumdrop Drop Tech cases 10" Screen Tablets with Griffin Technology cases 10" Screen Tablets with Belkin cases Many More! The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Maximum Width = 8.12" Length Range = 8.5" to 10.5" Maximum Depth = 1.12" Features: Support cups contain open slots to accommodate for tablets of varying dimensions Spring loaded for ease of removal and insertion of your tablet Full access to all ports Customize height of holder for your tablet Best usage in low vibration environments Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Hardware included to attach to mount.

RAM EZ-ROLL'R Model Specific Cradle f/Apple iPad 4, iPad 3 and iPad 2 w/o Protective Case The RAM-HOL-AP15U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure when on the go. Multiple AMPs hole patterns found on the back of the cradle, make it convenient for attaching various mounts for perfect articulation and viewing angles. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The RAM-HOL-AP15U DOES NOT contain the patent pending Uni-Conn™ docking connector; however, an open space is allocated for free attachment to various cable/docking connectors. Specifications/Features Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Multiple attachment hole patterns for convenient articulation and viewing angles 6. Lifetime warranty 7. Made in the U.S.A. Material: High Strength Composite

RAM Composite Twist Lock Suction Cup Mount with Universal X-Grip Cell Phone Holder The RAP-B-166-2-UN7U consists of a 2.75" twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: Spring loaded holder expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Versatility of holder allows for attachment to many RAM-to-RAM ball mounts Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite and Rubber Tips Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tab-Tite Universal Clamping Cradle f/Google Nexus 7 w/ or w/o Light Duty Sleeve The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 7" minimum to 8.875" maximum Width: maximum to 4.7" Depth: maximum to 0.43" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM® EZ-Roll'r™ Locking Cradle for Garmin dezl™ OTR700 The RAM® EZ-Roll’r™ cradle for the Garmin dezl™ OTR700 provides a secure fit with hardware to lock the GPS device into place. With the included cradle lock as a theft deterrent, keep the Garmin dezl™ OTR700 protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPS hole pattern.   Features: Form-fit cradle designed specifically for the Garmin dÄ“zl™ OTR700, securing your GPS while keeping all buttons and the power port fully accessible Locks the device in place so it cannot be removed without the use of tools Made of high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: Assembly Hardware (2) #8-32 x 5/8" Machine Screws (2) #8-32 Nylock Nuts (2) 4" Cable Ties Specifications: Hole Pattern: 2-Hole AMPS: 1.912" Materials: High Strength Composite Weight: 0.35lbs

Tab-Tite™ Drill-Down Mount with Backing Plate for Small Tablets This mount consists of a 2.10" x 2.60" backer plate, double socket arm, round base adapter, and Tab-Tite™ universal clamping cradle. The spring-loaded Tab-Tite™ cradle makes it easy to load and unload your tablet while keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet. By allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that fits the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Height Range: 7.375" - 10", Width Range: 4" - 5.31", Depth Range: .13" - 1.06" Socket to Socket Length (inch): 3” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum, high-strength composite, and steel Weight: 1.2 lb.

RAM EZ-Strap Rail Mount w/Universal X-Grip Cell Phone Holder The RAP-SB-187-UN7U consists of the RAM EZ-Strap base, double ball SHORT arm and universal X-Grip holder. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the universal X-Grip holder to your optimum viewing position. This mount rotates 180 degrees. Compatible Devices (WITH OR WITHOUT CASE): Apple iPhone 6 Apple iPhone 5s Apple iPhone 5c Apple iPhone 5 Apple iPhone 4S Apple iPhone 4 Apple iPhone 3GS Apple iPhone 3G Apple iPhone Apple iPod touch (All Models) Apple iPod (G1-G5) Samsung GALAXY S4 Samsung GALAXY S5 The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Holder Dimensions: Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 6. Single socket technology allows for multiple adjustment angles and articulation of device 7. Lifetime warranty Material: High Strength Composite & Stainless Steel Note: The "U" in the part number reflects product packaged in poly bag.

RAM Universal X-Grip® Cell Phone Holder Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Features: Spring loaded holder expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Versatility of holder allows for attachment to many RAM-to-RAM ball mounts Single socket technology allows for multiple adjustment angles and articulation of device Compatible Cases/Skins/Bumpers: Artwizz Ballistic Belkin BodyGlove Case-Mate DragonFly Ed Hardy FishBone G-Mate Griffin iFrogz iLuv InCase Incipio Inspiretech iSkin Ivyskin Krusell Luxmo Mobo Monaco Oakley Otterbox Seidio SolidColors Speck SwitchEasy Talon Cases TPhone Trident TurtleBack Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Material: High Strength Composite with Rubber Tips

RAM X-Grip II Part #: RAM-HOL-UN8BU Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle. The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets. Compatible Devices: Amazon Kindle Amazon Kindle Fire Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Panasonic Toughpad JT-B1 Samsung Galaxy Tab (7" version) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 2.25" (Devices 2.25" in width must be a minimum of 7" in height to fit) Maximum Width = 5.75" Depth = 0.875" Features: Spring loaded holder expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the holder for quick release of your tablet Material: High Strength Composite with Rubber Tips Ball Size: 1" Rubber Ball "B" Size

The RAM composite belt clip holder consists of an octagon locking button socket and diamond plate with octagon button. The belt clip holder can hold any RAM cradle that utilizes the diamond plate hole pattern as an attachment point.