Mixed Combination Pin-Lock Security Nut and Key Knob for 2.25"/3.38" Diameter D/E Size Arms The RAP-S-NUT5U consists of a 1/2"-20 female threaded security nut and key knob. The RAP-S-NUT5U replaces all knobs on 2.25"/3.38" diameter D/E size arms and mounts. The RAP-S-NUT5U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-NUT5U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-NUT5U is the perfect accessory for keeping your mounted electronic device safe from theft and tampering. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Mount not included with purchase.

Ram Mixed Combination Pin-Lock™ Security Knob/Stud/Key Knob f/ 2.25"/3.38" D/E Size Arms and Gimbal Brackets The RAP-S-NUT5-GU replaces the knob on 2.25"/3.38" diameter D/E size arms and gimbal bracket. The RAP-S-NUT5-GU offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-NUT5-GU is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-NUT5-GU is the perfect accessory for keeping your mounted electronic device safe from theft and tampering. Specifications/Features The RAP-S-NUT5-G consists of the following: 1. 1/2"-20 female threaded security lock knob and stud for (Gimbal Brackets) 2. 1/4"-20 brass security jam nut for (RAM 2.25/3.38" Diameter Ball Double Socket Arms) 3. Key Knob Material: High Strength Composite

Mixed Combination Pin-LockT Security Knob and Key Knob for 1.5" Diameter C Size Arms The RAP-S-KNOB5U consists of a 5/16"-18 female threaded security knob and key knob. The RAP-S-KNOB5U replaces all knobs on 1.5" diameter C size arms and mounts. The RAP-S-KNOB5U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOB5U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-KNOB5U is the perfect accessory for keeping your mounted electronic device safe from theft and tampering. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Mount not included with purchase.

Mixed Combination Pin-Lock Security Knob and Key Knob for 1" Diameter B Size Arms The RAP-S-KNOB3U consists of a 1/4"-20 female threaded security knob and key knob. The RAP-S-KNOB3U replaces all knobs on 1" diameter B size arms and mounts. The RAP-S-KNOB3U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOB3U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The RAP-S-KNOB3U is the perfect accessory for keeping your mounted electronic device safe from theft and tampering. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Mount not included with purchase.

RAM Pin-Lock™ Security Kit and 1.5" Diameter C Size Mount for Gimbal Brackets The RAM-SG-111U consists of a 2.5" diameter round base, STANDARD LENGTH double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security™ nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device. RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included threaded key knob replaces the gimbal knob, assuring your mounted electronic device is safe from theft and tampering. Features Overall Height: 7.35" Weight Capacity: Up to10 lbs Material: Powder Coated Marine Grade Aluminum and High Strength Composite Ball Size: 1.5" Rubber Ball Size

RAM Mixed Combination Pin-Lock™ Security Kit and 2.25" Diameter D Size Mount for Gimbal Brackets The RAM-SG-D-111U-C consists of a 3.68" diameter round base, SHORT LENGTH double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock™ security nut/knob and key knob for Gimbal Brackets. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts. RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included threaded key knob replaces the gimbal knob, assuring your mounted electronic device is safe from theft and tampering. Features: Overall Height: 8.125" Weight Capacity: Up to 15 lbs. Material: Powder Coated Marine Grade Aluminum and High Strength Composite Ball Size: 2.25" Rubber "D" Ball Size Note: The 11" x 3" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

RAM Pin-Lock™ Security Kit and 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Plate The RAM-S-111U consists of a 2.5" diameter round base, STANDARD LENGTH double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security™ nut and key knob. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device. RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. Features Overall Height: 7.35" Weight Capacity: Up to 10 lbs Material Powder Coated Marine Grade Aluminum and High Strength Composite Ball Size: 1.5" Rubber Ball Size

RAM Pin-Lock™ Security Kit and 2.25" Diameter Ball SHORT Mount with 11" X 3" Rectangle Plate The RAM-S-D-111U-C consists of a 3.68" diameter round base, SHORT LENGTH double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock™ security nut and key knob. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. Features Overall Height: 8.125" Weight Capacity: Up to 15 lbs Material: Powder Coated Marine Grade Aluminum and High Strength Composite Ball Size: 2.25" Rubber "D" Ball Size Note: The 11" x 3" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

RAM Mixed Combination Pin-Lock™ Security Kit for Single Swing Arm Mounts and Gimbal Brackets The RAP-S-KNOBG-109U includes Pin-Lock™ security knobs/keys for single swing arms and Gimbal brackets. The RAP-S-KNOBG-109U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOBG-109U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM®mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.

Ram Mixed Combination Pin-Lock™ Security Knob, Stud and Key Knob f/ Gimbal Brackets The RAM® Gimbal Security Knob is a great solution for securing your gimbal mounted electronics, whether or not it's mounted on a RAM®. The universal design utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM® mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering. ** Multiple key configurations for security purposes **

Ram Pin-Lock™ Security Kit f/ 1.5" C Size Mounts and Gimbal Brackets The RAP-S-KNOB5-GU includes Pin-Lock™ security knobs/keys for 1.5" dia. double socket arms and Gimbal brackets. The RAP-S-KNOB5-GU offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOB5-GU is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM®mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering. 

Ram Pin-Lock™ Security Kit f/ 1" B Size Mounts and Gimbal Brackets You make a significant investment in the equipment you purchase to make your job or hobby easier or more enjoyable. Whether it's a high end piece of marine electronics, a GPS for your motorcycle, or a tablet used for business purposes, you need to protect your investment. RAM® Mounts protect your device from harmful shock and vibration, but what about theft and tampering? RAM® offers a full suite of security products which protect your device while mounted on your RAM® mount from theft and unwanted tampering. Simply add a security knob or nut to your RAM Mount to deter would-be thieves from targeting your equipment. RAM® security solutions are also a great way to add tamper resistance to your RAM® Mount in situations where there is a desire to prevent end-users from adjusting the mount or removing the device. High strength composite and brass construction assures a long life of trouble free use in a wide variety of environments including marine and salt water.

RAM Double Socket Arm w/ Pin-Lock™ Security Knob and Key Knob f/ 1.5" Ball Bases

RAM® Pin-Lock™ Security Kit for Single Swing Arms & Gimbal Brackets The RAP-S-KNOBG-109U includes Pin-Lock™ security knobs/keys for single swing arms and Gimbal brackets. The RAP-S-KNOBG-109U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOBG-109U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM® mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering. Hardware Included: (2) RAM Pin-Lock Security Keys (1) 1.25" Nylon Washer (1) #10-24 x .72" Threaded Stud Adapter (1) 5/16"-18 x 1.06" Threaded Stud Adapter (1) 1/4"-20 x 1.34" Threaded Stud Adapter (1) M5-.8 x 12mm Threaded Stud Adapter (1) M6-1 x 16mm Threaded Stud Adapter (1) M8-1.25 x 21mm Threaded Stud Adapter (4) .72" Nylon Washers (1) .77" Nylon Washer

RAM Double Socket Arm w/Jam Nut f/2.25" Ball Bases Part #: RAM-D-201U-MI1 The RAM-D-201U-MI1, standard size double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 8.375" Socket-To-Socket Length: 6.5625" Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size