RAM® Standard Heavy Duty Accessory/Display Bracket  Keep your keyboard, phone, dock, and/or monitor in one secure, easy-to-access location with the RAM® Accessory/Display Bracket. The RAM-DIS-103-1AU supports most monitors using the popular VESA hole pattern in portrait mode, allowing for a keyboard with the AMPS hole pattern to be connected below the monitor. Includes hardware to attach a round or diamond base to the AMPS hole pattern on the bracket. Features: Display bracket designed to mount a tablet or monitor, keyboard, phone, docks, hubs, speakers, and more; take full advantage of the GDS® Ecosystem™ Compatible with RAM® Tele-Pole™ mounting systems Contains standard VESA and AMPS hole patterns for mounting devices in landscape or portrait mode Features structural ribs for added strength and stability to support heavier devices and accessories Backed by a lifetime warranty Specifications: Hardware Included: (4) #8-32 x 5/8" Machine Screws, (4) #8-32 Nylock Nuts  Product Dimensions: Overall Length 10.97" Weight: 1.47lbs

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

Clamp-On Accessory Fits: 1.050" Pipe Mounts: Horizontal/Vertical Finish: Silver Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.

Clamp-On Accessory Fits: 1.050" Pipe Mounts: Horizontal/Vertical Finish: Silver Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.

Clamp-On Accessory Fits: 1.660" Pipe Mounts: Horizontal/Vertical Finish: Silver Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.

Clamp-On Accessory Fits: 1.900" Pipe Mounts: Horizontal/Vertical Finish: Silver Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.

Heavy-Duty Toggle Switch SPST On-Off 2-Wire Toggle Switches are designed for universal applications within harsh environments. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Standard Heavy Duty Toggle Switch Series is our most robust series of toggle switches, available in several configurations of actuators and circuitries. Specifications: Mounting: Nickel Plated Brass Face Nut through 15/32 (11.90mm) Panel Hole *Part Number 5520: Black Finished Face Nut Voltage Ratings: 10A at 36V DC/15A at 24V DC/25A at 12V DC Current Rating (Continuous) in Amps: 10 Voltage Rating (Max): 36 Circuitry: SPST  Input Terminals: 2 Leads (203mm 16AWG Stripped) 1 Plug - 2 Leads (203mm 6AWG Stripped) 1 Plug Housing: Weather-Resistant PVC-Coated Plasticized Housing Actuator: Standard Toggle Actuator Details: Nickel-Plated Brass - 17.4625 Panel Thickness: Up to 1/4 (6.35mm) thick Contact Material: Silver Recommended Torque: On - None - Off

RAM® Roller-Ball™ Paddle & Accessory Holder With the RAM® Roller-Ball™ Clip for Tracks, easily secure your net, paddle, gaff hooks, stakeout/push poles, or BogaGrip®. Its three-point security design means there are always three points of tension keeping your net, paddle or other items attached, while also ensuring quiet placement and removal. The T-Bolt adapter is compatible with the RAM® Tough-Track™ and most other kayak track systems, and holds paddles and poles 1” - 1 5/16” in diameter. Note: This product consists of one single RAM® Roller-Ball™ Clip. For larger paddles and heavy duty applications, a second RAM® Roller-Ball™ may be required. Specifications: Material: Rubber and High Strength Composite Note: Part number reflects product packaged in retail bag for store shelf display Weight: 0.3 lbs. T-Bolt Dimensions: .48" x .95"

2-Pack RAM® Roller-Ball™ Paddle & Accessory Holder With the 2-Pack RAM® Roller-Ball™ holder for tracks, easily secure your heavy-duty net, paddle, gaff hooks, stakeout / push poles, or BogaGrip®. Its three-point security design on each RAM® Roller-Ball™ means there are always three points of tension keeping your net, paddle or other items attached, while also ensuring quiet placement and removal. The T-Bolt adapter is compatible with the RAM® Tough-Track™ and most other kayak track systems, and holds paddles and poles 1” - 1 5/16” in diameter.  Specifications: Material: Rubber and High Strength Composite Note: Part number reflects product packaged in retail bag for store shelf display Weight: 0.5 lbs. T-Bolt Dimensions: .48" x .95"

RAM® Drill-Down Heavy Duty Mount for weBoost This weBoost mounting kit includes a 3/8"-24 X .375" threaded RAM® Tough-Ball™ that screws directly into the weBoost antenna, a C size medium length socket arm, and a C size RAM® Diamond Ball base for flat surface drill-down mounting such as a rear bumper, spare tire carrier, or antenna bracket. The adjustability of the RAM® Mounts system allows you to collapse the antenna while not in use, as well as extend the reach of the weBoost antenna is mounted in a tight space. This weBoost antenna mount is compatible with all weBoost vehicle antennas including the Drive Reach OTR, RV, and Drive X RV antennas making this the ideal mounting solution for off-road vehicles and semi-trucks.  Features: Kit includes 3/8"-24 X .375" Threaded RAM® Tough-Ball™ that screws into thread adapter of the weBoost antenna, C size medium length socket arm, and C size RAM® Diamond Ball base for flat surface drill-down mounting such as a rear bumper, spare tire carrier, or antenna brackets The adjustability of the ball and socket technology allows the weBoost mount to collapse when not in use, and provide extended reach in tight mounting areas Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: HOLE PATTERN: 2-Hole AMPS 1.912" THREAD PITCH: 3/8"-24 X .375" PLATE SIZE: 2.43" x 1.31" BALL/SOCKET SIZE: C Size (1.5") WEIGHT CAPACITY: Standard Use: 4 lbs, Heavy-Duty Use: 3 lbs MATERIALS: Marine-grade aluminum, High strength composite

PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 Gen2 Touch, HDS-9 Gen3 & HDS Carbon 9 - Carbon Black PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats. Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy to reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted.  PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions.  This protection assures reliability and longevity of your marine electronics. PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution.  RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing. When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance.  This will allow most boat covers to fit over the PedestalPod when not in use. Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. PedestalPods are waterproof housings for marine electronics specifically designed for bass boats. PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your marine electronics from the harshest of wet boating conditions. PedestalPods provide the convenience of height for accessibility and added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20” off the deck and located near the bow and at a 45-degree angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. They keep harsh spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PedestalPod. The heavy duty, black powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look. It provides protection for wires and connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PedestalPods are available pre-cut for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. Constructed out of durable ABS like all Gen3 NavPods, black carbon PedestalPods have the same high gloss finish with UV stability. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods. PedestalPods – Protection, Convenience, Security

RAM 1.5" Ball Mount with 6.25" X 2" Rectangle Base, Double Socket Arm & Track Ball™ Base The RAM-111B-354-TRA1U consists of a Track Ball™ base that can attach to any track system including the RAM Tough-Track™. Connected to the base is a standard length double socket arm and 6.25" x 2" rectangle plate for supporting a wide range of fishfinders and chartplotters. The rectangular plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum and High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear polybag for store shelf display. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

RAM® Keyboard Accessory for Tablets with RAM® Roto-View™ RAM is pleased to offer the most simple and effective way to mount a keyboard with your iPad or tablet. Tablets are great for their ease of use and portability. One of the downfalls is the inability to efficiently enter data using the tablet touch screen. Now you can mount a Bluetooth keyboard cost-effectively in conjunction with your RAM Tablet mounting solution, using this unique design. This simple design clamps an 8” tube between any RAM tablet cradle, and the Patent Pending Roto-View™ round adapter plate allows for adjustment to accommodate many tablet configurations, including use in both landscape and portrait mode.  The 8” tube has a 1” ball on the end which connects to a standard RAM double socket arm and Magnetic Power Plate™ III for easy placement and removal of the keyboard. If you do not already own a keyboard, RAM offers a low-cost Bluetooth keyboard as an option with the keyboard mounting system. Offering the widest range of tablet mounting solutions available worldwide, RAM now offers yet another revolutionary product in tablet mounting solutions. Features: Mounting kit designed for your tablet and keyboard setup; RAM® Roto-View™ attaches to a variety of RAM® tablet holders Includes RAM® Power Plate™ III for simple placement and removal of your keyboard Made of high-strength composites and steel for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Overall Length: 13.75" Hole Pattern: Front: 2-Hole AMPS 1.912", Back: 4-Hole AMPS 1.181" x 1.496"  Ball/Socket Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb  Materials: High strength composite

12 V Heavy Duty Tab Actuator - 6' Cable  Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator.  The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket.  Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates a standard or low profile transom mounting bracket.  Features: Stainless Steel upper mounting bracket Reinforced actuator upper mounting boss Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation All actuators fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 6' (1.8 M) Actuator Vertical Height - 11.875" (302 mm) Upper Mounting Bracket - Stainless Steel - 12 gauge Lower Mounting Bracket - Standard *Sold as an Individual

RAM® Tab-Lock™ Holder for 9"-10.5" Tablets with Heavy Duty Cases The RAM-HOL-TABL20U consists of a spring loaded back plate, custom support cups and locking mechanism offers theft deterrence and unwanted tampering in public settings. This spring loaded design makes it easy to load and unload your iPad Air, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad Air secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Note: Product consists of holder only. Case not included.  Features: Spring-loaded, key locking holder secures most 9" tablets with heavy-duty cases; interchangeable end cups allow you to modify the holder when upgrading devices Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: Assembly Hardware (2) #8 x 5/8" Sheet Metal Screws (2) M4 x 32mm Machine Screws (2) M4 Nylock Nuts (2) Keys Holder Dimensions: Height Range: 9.25" - 12.125" Width Range: 6.55" - 7.43" Depth Range: .3" - .875" Specifications: Hole Pattern: 4-Hole AMPS 1.181" x 1.496" Materials: High strength composite