|
Split Ring - 10mm(3/8") Diameter
Suits Clevis Pins RF258-RF266
|
0.86 |
|
|
Wire Rope Grip - Size 10 - 10mm(3/8") Diameter Wire
Features:
Used when adjustment in strop length is needed
Stainless Steel
Require no special tools for assembly and can be disassembled and reused
|
11.32 |
|
|
Split Ring - 11mm(7/16") Diameter
Suits Clevis Pins RF260-RF266
|
0.86 |
|
|
Prince DP3 1012 Windlass - 1000W - 12V - 10mm (3/8") Gypsy
This Quick Prince windlass is a vertical-axis windlass.
Application:
For boats 10-14 m (33-46 ft.)
Features:
No drum
Vertical windlasses
Stainless steel Aisi 316 base and anodized aluminum in hard oxide
Rope and chain on a single gypsy
Integrated sensor and a magnet for chain counter
Manual Free-Fall system
Supplied with pressure lever
Inspection lid
Motor watertight to IP67
Technopolymer Gearbox (1000W)
Specifications:
Rope: 5/8 in. (15,8 mm)
Motor Power: 1000 W
Motor Supply Voltage: 12 V
Maximum Pull: 1000 Kg / 2204 lb
Maximum working load 370 Kg / 816 lb
Working Load: 120 Kg / 264 lb
Current Absorption @ Working Load: 140 A
Maximum Chain Speed: 39,6 m/min / 129.2 ft/min
Maximum Chain Speed @ Working Load: 20,4 m/min / 66.9 ft/min
Weight - DP3 - [without drum]: 17,4 Kg / 38 lb
|
1942.79 |
|
|
Kit Liberty Stripper Assembly - 10mm - 3/8" Chain
Features:
Maxwell Marine Replacement Windlass Stripper
Applications: Maxwell Liberty 2500 Windlass
Chainwheel: 3/8"
Includes Screw
|
48.60 |
|
|
Teak Trim Ring
5-3/8" Diameter Trim Ring
3" Inner Diameter Opening
3/8" Thick
5" Inner Diameter (Inside Flange)
Pre-Drilled Mounting Holes
Back Recessed, 1/8" Flange
Use to trim out portholes
|
30.90 |
|
|
Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (1998 & Newer)
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and hose fitting engine end 8896LP6
Universal for any engines and tanks
In-Line Fuel Demand Valve
The kit also has a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
46.14 |
|
|
Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (Pre-1998)
This EPA-certified Attwood Mercury (Pre-1998) Fuel Line Kit reliably delivers fuel to your Pre-1998 Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8893-6
For Mercury Pre-1998 engines and tanks
It also includes an award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant)
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.
|
46.14 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Johnson/Evinrude engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve in this kit
|
46.14 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
In-Line Fuel Demand Valve
Hose and tank fittings come with pre-applied thread sealant
Reliably delivers fuel to your Johnson or Evinrude engine
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
69.84 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)
This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end
For Johnson/Evinrude engines and tanks
*No Fuel Demand Valve or Tank Fitting is included in this kit
|
48.43 |
|
|
Yamaha Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)
This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Yamaha engines and tanks. The kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
These Attwood Hose Fittings Are Included: A pair of hose fittings 8896LP6 for the tank end and the engine end
for Yamaha engines and tanks
*No Fuel Demand Valve or Tank Fitting is included in this kit
|
48.43 |
|
|
Honda Fuel Line Kit - 3/8" Diameter x 6' Length
This EPA-certified Attwood Honda Fuel Line Kit reliably delivers fuel to your Honda engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Hose Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8900-6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Honda engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve is included in this kit
|
49.10 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length
This Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
3/8" x 6' Low Permeation Hose
Universal for any engines and tanks
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Reliably delivers fuel to your engine
*Does not include fittings for the tank end and for the engine end
|
39.74 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 12' Length
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 12-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
12' x 3/8" Low Permeation Hose
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
Universal for any engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
Reliably delivers fuel to your engine
*No tank or engine fittings
|
52.38 |
|