SnapIt! Marine M0016 Single Lifeline Drink Holder for Sailboats This Classic Lifeline Drink Holder is sized for canned drinks with insulated sleeves. I.D. 3.5” Overall Height 10.15”. Guaranteed not to fall off accidentally! You get One drink holder this is longer than the V0016.

SnapIt! Marine H002H Double Drink Holder for Sail & Power Boats Simply snap one of these unique drink holders onto the horizontal tubing on your boat and put an end to spills on the deck. Interior Dimension 3.6”(2.59” at narrowest point)X 7.35”. Overall Height 8.95”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. (Needs 8" of space between the deck and tube).

SnapIt! Marine V002 Double Drink Holder for Sail & Power Boats   Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars.      Interior Dimensions 3.625” (3” at the narrowest point) x 7.85”.  Overall Height 3.95”. Includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm) round tubing. Plus offers the option of bulkhead mount with enclosed screws.

SnapIt!’s V Series Lifeline Drink Holder. Sized for canned drinks with insulated sleeves. I.D. 3.5” Overall Height 9.75”. Guaranteed not to fall off accidentally!

Double Drink Holder for Power & Sailboats This Double Drink Holder is sized for canned drinks with insulated sleeves. Interior Dimension 3.625” (2.5” at narrowest point) X 7.85”. Overall Height 3.375”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft. Designed to mount at the “T” intersection of tubes on the handrails, bow or stern pulpits.

Single Pivoting Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4.1”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired. Designed primarily for mounting to angled tubes on the boat.

SnapIt! Marine M0019 Wine Glass Holder for Sail & Power Boats Wine Glass Holder, use the supplied retainer hoop for permanent mounting or use the unit without the hoop for the convenience of snapping the unit on to various tube locations. I.D. 2.05” Overall Height 1”.

Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars. Interior Dimensions 3.625”(3” at narrowest point) x 7.85”. Overall Height 3.5”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.

Single Pivoting Drink Holder sized for canned drinks with insulated sleeves.   I.D. 3.625” Overall Height 4”.   Includes the UniClamp, which fits round tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm). Plus offers the option of bulkhead mount with enclosed screws. Designed for permanent mounting.   Intended primarily for mounting to angled tubes on the boat.

Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars. Interior Dimensions 3.625”(3” at narrowest point) x 7.85”. Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

The practical elegance of the SnapIt! M005 binnacle mounted drink holder with the added feature of the V Series versatile mounting system.   Hold an assortment of four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs!   Attaches directly to the pedestal guard, no other mounting hardware is needed and NO drilling. Versatile Mounting System includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm), and adjusts for 9.5, 12 and 12.5” center to center spacing on the pedestal guard.  Use #2 Phillips screwdriver to attach unit.    Narrow profile is designed for pedestal guards that sit forward of the compass housing.  For pedestal guards that have the compass sitting forward of the leading edge of the pedestal guard tubes please see SnapIt! models, M0023, V0023 or M0027.   Have pedestal guard on 9.5" centers and want the simplicity of snapping the unit in place?  See item M005.   17.375" Wide x 4.625" Deep x 3.375" High  

Single/Dual Drink Holder with Suction Cups  This expandable drink holder offers a flexible solution mounting easily to most surfaces with suction cups. Expands from single to dual holders conserving space when not in use. Accommodates drink containers up to 3-1/2" in diameter. Impact resistant injection molded nylon construction.

SnapIt! Marine M001 Single Drink Holder for Power & Sailboats Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

Single Drink Holder for Sail & Power Boats Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.375”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft. Designed to mount at the “T” intersection of tubes on the handrails, bow or stern pulpits.

Martini Glass Holder for power boats. I.D. 2.05” Overall Height 1.6”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft.