|
Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.
|
36.00 |
|
|
Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”.
Includes the UniClamp, which fits round tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm). Plus offers the option of bulkhead mount with enclosed screws.
|
36.00 |
|
|
Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.
|
36.00 |
|
|
Light and economical Convertible unit functions as a saving Single or Double Drink Holder sized specifically for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.15”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.
|
25.00 |
|
|
SnapIt! Marine P002 Pontoon Boat Double Drink Holder
Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.86”. Cutout on top ring can be useful for hanging sunglasses, etc. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
29.00 |
|
|
Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.Functional system for holding an assortment of four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard. No additional mounting hardware is needed and NO drilling.
If the compass on the boat extends forward of the leading edge of the tubes on the pedestal guard please see models M0023, M0027, V0023 or V0027.
Order for specific tube diameter on 9.5" center to center spacing.
For pedestal guards with 12 or 12.5" center to center spacing please see model V005.
|
75.00 |
|
|
Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.8”. Cutout on top ring can be useful for hanging sunglasses, etc. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
29.00 |
|
|
SnapIt! Marine M0023 Sailboat Binnacle Mounted Drink Holder
The M0023 Curved Binnacle Drink Holder offers the same functionality as the M005 but is designed to allow additional clearance for the compass on the pedestal. Holds four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard, no other mounting hardware is needed and NO drilling.
Order for specific tube diameter on 9.5" center to center spacing.
For pedestal guards with 12 or 12.5" center to center spacing please see model V0023.
|
75.00 |
|
|
SnapIt! Marine H002H Double Drink Holder for Sail & Power Boats
Simply snap one of these unique drink holders onto the horizontal tubing on your boat and put an end to spills on the deck. Interior Dimension 3.6”(2.59” at narrowest point)X 7.35”. Overall Height 8.95”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. (Needs 8" of space between the deck and tube).
|
43.00 |
|
|
SnapIt! Marine M001 Single Drink Holder for Power & Sailboats
Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.
|
23.00 |
|
|
SnapIt! Marine M0016 Single Lifeline Drink Holder for Sailboats
This Classic Lifeline Drink Holder is sized for canned drinks with insulated sleeves. I.D. 3.5” Overall Height 10.15”. Guaranteed not to fall off accidentally! You get One drink holder this is longer than the V0016.
|
19.00 |
|
|
SnapIt! Marine V002 Double Drink Holder for Sail & Power Boats
Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars.
Interior Dimensions 3.625” (3” at the narrowest point) x 7.85”.
Overall Height 3.95”.
Includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm) round tubing. Plus offers the option of bulkhead mount with enclosed screws.
|
29.00 |
|
|
Double Drink Holder for Power & Sailboats
This Double Drink Holder is sized for canned drinks with insulated sleeves. Interior Dimension 3.625” (2.5” at narrowest point) X 7.85”. Overall Height 3.375”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft. Designed to mount at the “T” intersection of tubes on the handrails, bow or stern pulpits.
|
31.00 |
|
|
Single Stainless Steel Drink Holder - Vertical Mount
Edson Single Stainless Drink Holder - Vertical Mount is great for mounting to the side of your bulkhead, center console or any vertical location on your boat! With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place.
|
51.30 |
|
|
Convertible 2 in 1 Drink Holder
This is sized to fit can drinks with insulated sleeves. Space saving unit conveniently opens to hold two drinks when needed. I.D. 3.6” Overall Height 4.5”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
31.00 |
|