The V0023 Curved Binnacle Drink Holder offers the same functionality as the M0023 with clearance for the compass on the pedestal. It also holds four beverages, including mugs, or two drinks and a pair of binoculars. Verstile Mounting System includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm), and mounting locations for 9.5", 12" and 12 1/2" center spacing. Don't know your tubing diameter or center to center spacing--concerned about taking the unit with you when you upgrade?  No problem!  This unit fits the majority of standard binnacle guard sizes. No holes to drill!  All mounting hardware included! Have a pedestal guard on 9.5" center to center measurement and want the simplicity of snapping the unit in place?  See item M0023.

SnapIt! Marine M0023 Sailboat Binnacle Mounted Drink Holder     The M0023 Curved Binnacle Drink Holder offers the same functionality as the M005 but is designed to allow additional clearance for the compass on the pedestal. Holds four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard, no other mounting hardware is needed and NO drilling.               Order for specific tube diameter on 9.5" center to center spacing.           For pedestal guards with 12 or 12.5" center to center spacing please see model V0023.

SnapIt! Marine M0023-350 Catalina 350 Model Specific Binnacle Drink Holder fits Catalina 350 Series II only and 387    This Drink holder Only Fits the Catalina 350 Series II and 387 with the pedestal that has the enclosed cabinet on it.   Features two integrated handheld electronics holders with interior openings of 2.875”x1.625” and 2.375”x1.625”. Overall height is 3.5".    This is a SPECIAL ORDER ITEM, made at time of order. NO Returns. Does not fit Catalina 350 MK II.

SnapIt! Marine V002 Double Drink Holder for Sail & Power Boats   Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars.      Interior Dimensions 3.625” (3” at the narrowest point) x 7.85”.  Overall Height 3.95”. Includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm) round tubing. Plus offers the option of bulkhead mount with enclosed screws.

The practical elegance of the SnapIt! M005 binnacle mounted drink holder with the added feature of the V Series versatile mounting system.   Hold an assortment of four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs!   Attaches directly to the pedestal guard, no other mounting hardware is needed and NO drilling. Versatile Mounting System includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm), and adjusts for 9.5, 12 and 12.5” center to center spacing on the pedestal guard.  Use #2 Phillips screwdriver to attach unit.    Narrow profile is designed for pedestal guards that sit forward of the compass housing.  For pedestal guards that have the compass sitting forward of the leading edge of the pedestal guard tubes please see SnapIt! models, M0023, V0023 or M0027.   Have pedestal guard on 9.5" centers and want the simplicity of snapping the unit in place?  See item M005.   17.375" Wide x 4.625" Deep x 3.375" High  

Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.Functional system for holding an assortment of four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard. No additional mounting hardware is needed and NO drilling. If the compass on the boat extends forward of the leading edge of the tubes on the pedestal guard please see models M0023, M0027, V0023 or V0027. Order for specific tube diameter on 9.5" center to center spacing.   For pedestal guards with 12 or 12.5" center to center spacing please see model V005. 

No ugly square boxes allowed! This versatile binnacle mounted unit is much more than just a drink holder. The Pedestal Organizer includes the features of our standard units with the added benefit of a walled center section complete with drainage holes that allows for the storage of small items such as keys, wallets, pocket change as well as larger items such as binoculars and water bottles. V Series versatile mounting system includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm), and mounting locations for 9.5", 12" and 12 1/2" center to center spacing.  No drilling required!  Use #2 Phillips Screwdriver to attach unit. Don't know your tubing diameter or center to center spacing--concerned about taking the unit with you when you upgrade?  No problem!  This unit fits the majority of standard binnacle guard sizes. Have a pedestal guard on 9.5" center to center and want the simplicity of snapping the unit in place?  See item M0027. 16.25" Wide x 6" Deep x 3.375" High   Custom made at time of order, none returnable.

SnapIt! Marine H002H Double Drink Holder for Sail & Power Boats Simply snap one of these unique drink holders onto the horizontal tubing on your boat and put an end to spills on the deck. Interior Dimension 3.6”(2.59” at narrowest point)X 7.35”. Overall Height 8.95”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. (Needs 8" of space between the deck and tube).

No ugly square boxes allowed! This versatile binnacle mounted unit is much more than just a drink holder. The Pedestal Organizer includes the features of our standard units with the added benefit of a walled center section complete with drainage holes that allows for the storage of small items such as keys, wallets, pocket change as well as larger items such as binoculars and water bottles.   Order for specific tube diameter on 9.5" center to center spacing.   For pedestal guards with 12 or 12.5" center to center spacings please see model V0027.

SnapIt! Marine M0016 Single Lifeline Drink Holder for Sailboats This Classic Lifeline Drink Holder is sized for canned drinks with insulated sleeves. I.D. 3.5” Overall Height 10.15”. Guaranteed not to fall off accidentally! You get One drink holder this is longer than the V0016.

SnapIt! Marine M001 Single Drink Holder for Power & Sailboats Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

Single Drink Holder for Sail & Power Boats Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.375”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft. Designed to mount at the “T” intersection of tubes on the handrails, bow or stern pulpits.

SnapIt!’s V Series Lifeline Drink Holder. Sized for canned drinks with insulated sleeves. I.D. 3.5” Overall Height 9.75”. Guaranteed not to fall off accidentally!

SnapIt! Marine P003 Flush Mount Pontoon Quad Drink Holder This Quad Drink Holder is sized to fit can drinks with insulated sleeves and many mugs. The mug opening diameter is 3.625”. Interior Dimension are 3.895x8.12”. Overall Height 3.86”. Overall Width 18.4”. Cutouts on top ring can be useful for hanging sunglasses, etc. Flush mount unit not suited for use in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White

SnapIt! Marine P002 Pontoon Boat Double Drink Holder Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.86”. Cutout on top ring can be useful for hanging sunglasses, etc. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.