|
Draw Bar Storage Bag
Black
Don't bang your shins!
Store the draw bar and keep your vehicle clean
Remove the draw bar and hitch ball from your vehicle to prevent banging your shin. Store it conveniently in your tow vehicle. Bag is padded with a strong zipper closure. Will easily hold a 2" receiver drawbar and hitch ball with a 2" rise or a 4" drop. Made of strong 600 Denier polyester with PVC backing. Includes a carry handle and a pocket to hold hitch pin.
Size: 15"L x 6"H x 4"D
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.12 |
|
|
T-Top Storage Bag
Stores life vests & other boating essentials
Features:
Safe velcro closure for instant emergency access to life jackets
Vented top allows for quick drying of wet gear
2 mesh side storage pockets, 1 mesh bottom storage pocket and 1 large dry zippered pouch to store phones, wallets, glasses and other valuables
Mounts under a T-top with four 2" wide adjustable snap buckle straps
Strong 600 denier polyester construction
Main Compartment holds 4 life jackets or other boating gear
Extra large 24" x 6" dry zipper pocket
25" wide x 20" deep x 6" high
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
86.23 |
|
|
C.E. Smith Company
C. E. Smith Company, Inc. was established as a manufacturing firm producing precision metal stampings, fabrications and assemblies for a broad variety of industries. Stainless steel boating and fishing products are sold under the SMITH TM trademark. The line includes an adjustable, completely stainless steel t-top, fiberglass electronic boxes, t-top storage bags navigation lights and antenna bracket.
|
|
|
Black 40" Post Guide-On & FREE Camo Wet Lands Guide-On Pads
This kit includes two C.E. Smith 40" Black Post Guide-Ons and two Camo Wet Lands Post Guide-On Pads. C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season. While the camo post-guide-on pads, are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
Built to last season after season
40" tall
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post-guide-on covers: Camo Wet Lands
Kit Includes:
Part 27626: C.E. Smith Black 40" Post Guide-Ons
Part 27902: C.E. Smith Post Guide-On Pad - 36" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
94.58 |
|
|
60" Black PVC Post Guide-On & FREE Camo Wet Lands Post Guide-On Pads
This kit includes two 60" Black PVC Post Guide-Ons and two Camo Wet Lands Post Guide-On Pads. The C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
60" Overall Height
Mounting brackets and metal uprights allow for 19” of adjustment on each side of the trailer frame.
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post guide-on covers: Camo Wet Lands
Kit Includes:
Part 27646: C.E. Smith 60" Black PVC Post Guide-On
Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
137.94 |
|
|
Tournament Fish Cooler Bag
Features:
4 Strong Handles make easy work of transporting a catch of big fish
Huge Capacity for the big ones that don't fit in the cooler!!
Keeps your catch cool all day preventing weight loss and spoilage. Thick 3/4" closed cell foam insulation all around. Reflective liner helps preserve ice to keep fish cooler longer. Tough marine grade white vinyl exterior. Large corrosion proof zipper. 4 reinforced carry handles allow carry by 1, 2 or even 4 persons. Convenient roll-up design for compact storage until needed, then unrolls to 22" x 70". Includes nylon storage bag.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
161.03 |
|
|
Black 40" Post Guide-On
C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season.
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
Built to last season after season
40" tall
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
94.58 |
|
|
60" Black PVC Post Guide-On
C.E. Smith® Trailer Post Guide-Ons give a clear visual marker to know you're backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion resistance, and 2-3/8"-dia. Black PVC posts, to stand up strong season after season.
Features:
Provide a clear marker for backing, loading, or unloading your boat trailer
16 gauge square steel uprights
Pre-galvanized construction for corrosion resistance
2-3/8" black PVC posts
60" Overall Height
Mounting brackets and metal uprights allow for 19” of adjustment on each side of the trailer frame.
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side).
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
*Sold in pairs
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
159.16 |
|
|
60" Post Guide-On with L.E.D. Posts & FREE Camo Wet Lands Post Guide-On Pads
The kit includes two 60" Post Guide-Ons With L.E.D. Posts and two Camo Wet Lands Post Guide-On Pads. The Post Guide-Ons allows you to see the location of your trailer when it's underwater. Equipped with long-lasting, waterproof, and shockproof, one-piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Mounting hardware and wiring included
Adjusts Out to 19" on each Side
Fits Frames up to 3"W x 4-1/4"H
1-1/2" square, 16 gauge pre-galvanized steel uprights that are 39" high
2-3/8" diameter white PVC posts
Stands 60" above the trailer frame
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post guide-on covers: Camo Wet Lands
Kit Includes:
Part 27760: C.E. Smith 60" Post Guide-On With L.E.D. Posts
Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
187.70 |
|
|
PVC 40" Post Guide-On with Unlighted Posts & FREE Camo Wet Lands Post Guide-On Pads
This kit includes two PVC 40" Post Guide-Ons With Unlighted Posts and two Camo Wet Lands Post Guide-On Pads. The PVC posts allow you to see the location of your trailer when it's underwater. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Mounting hardware included
Adjusts out to 13" on each Side
Fits Frames up to 3" W x 4-1/4" H
18" high
2" schedule 40 white PVC posts (2-3/8" actual OD)
Stands 40" above the trailer frame with white post caps
Fits trailer frames up to 3" wide x 5-1/4" tall
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post guide-on covers: Camo Wet Lands
Kit Includes:
Part 27620: C.E. Smith 40" Post Guide-On With Unlighted Posts
Part 27902: C.E. Smith Post Guide-On Pad - 36" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
98.51 |
|
|
40" Post Guide-On with L.E.D. Posts & FREE Camo Wet Lands Post Guide-On Pads
The kit includes two 40" Post Guide-Ons With L.E.D. Posts and two Camo Wet Lands Post Guide-On Pads. The Post Guide-Ons allows you to see the location of your trailer when it's underwater. Equipped with long-lasting, waterproof, and shockproof, one-piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Mounting hardware and wiring included
40" Total Height
Adjusts Out to 13" on each Side
Fits Frames up to 3"W x 4-1/4"H
1-1/2" sq. 16 ga Pre-Galvanized Steel post
Extends 18" Into 2" PVC tube for strength
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post guide-on covers: Camo Wet Lands
Kit Includes:
Part 27740: C.E. Smith 40" Post Guide-On With LED Lighted Posts
Part 27902: C.E. Smith Post Guide-On Pad - 36" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
125.94 |
|
|
60" Post Guide-On with I-Beam Mounting Kit & FREE Camo Wet Lands Post Guide-On Pads
The kit includes two 60" Post Guide-Ons With I-Beam Mounting Kits and two Camo Wet Lands Post Guide-On Pads. These Post Guide-Ons allow you to see the location of your trailer when it's underwater. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and virtually any width I-beam trailer frame. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Mounting hardware included
Adjusts out to 19" on each side
1-1/2" square. 16 gauge pre-galvanized steel uprights
2-3/8" diameter white PVC posts
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post-guide-on covers: Camo Wet Lands
Kit Includes:
Part 27648: C.E. Smith 60" Post Guide-On With I-Beam Mounting Kit
Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
166.60 |
|
|
60" Post Guide-On with Unlighted Posts & FREE Camo Wet Lands Post Guide-On Pads
This kit includes two 60" Post Guide-On With Unlighted Posts and two Camo Wet Lands Post Guide-On Pads. These Post Guide-Ons allow you to see the location of your trailer when it's underwater. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Mounting hardware included
Adjusts out to 19" on each side
Fits frames up to 3" W x 4-1/4" H
1-1/2" square, 16 gauge pre-galvanized steel uprights
39" high
2-3/8" diameter white PVC posts.
Stands 60" above the trailer frame with white post caps.
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post guide-on covers: Camo Wet Lands
Kit Includes:
Part 27640: C.E. Smith 60" Post Guide-On With Unlighted Posts
Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands
*Sold in pairs
|
138.01 |
|
|
53696 Rod Safety Ring
Attach the C.E. Smith Rod Safety Ring to the bottom of rod holders and stop worrying about dropping your equipment.
Made to secure into the 0.5" drain hole found at the bottom of the flush-mount cast-bottom rod holder from C.E. Smith, the rod safety ring gives you a convenient place for you to tether your rod and reel, boat fender, or any other valuable you don't want to fall overboard.
Features:
Provides a convenient place to secure rods
316L Marine-grade stainless steel
Quick and easy installation
*Sold as an Individual
|
7.20 |
|
|
Double Slot Swivel Bolster Bracket Assembly - 13"
C.E. Smith's adjustable bracket is designed to support roller bunks. Hot dip galvanizing for years of use in the harsh marine environment. This bracket assembly uses bolster bracket-10102G and swivel bracket-10200G.
Features:
Bolster bracket: 12" bracket, 11 gauge material, 2-1/2" wide, slots 1/2" wide, swivel hole 1/2" dia., slots 4-3/4"
Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia., swivel flange 2" tall x 3-1/2", swivel flange hole 1/2" dia., hole centers 2-1/2"
Overall assembly length is 13"
|
7.87 |
|