|
3 Pole Trailer Connector
Plug Socket, Trailer Connector, Flat, 3 Pole
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.63 |
|
|
2 Pole Trailer Connector
Plug Socket, Brass, Trailer Connector, Flat, 3 Pole
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.21 |
|
|
COLE HERSEE
Littelfuse acquired Cole Hersee to offer customers a more extensive portfolio of products in the commercial vehicle market. Cole Hersee is a pioneer and leader in the development of heavy-duty electrical products for the vehicle industry, and have earned a reputation for quality and value.
|
|
|
4 Pole Plug & Socket Connector with Rubber Cap
Normally used with a trailer where only limited functionality (taillights. brake lights) is needed. Ideal for boat trailers or RVs towing a car on a flatbed trailer.
Features:
Diecast metal housings
Screw terminals accept up to 12 AWG wire.
Replaceable interiors
Brass split-pin contacts are aligned to assure proper contact and minimal voltage drop
Spring-loaded socket doors (the plug locks securely into the opening)
Wiring codes are identified on the insulator
Two mounting holes on the flange are 17/64" (6.7 mm) in diameter. 2-15/16" (74.6 mm) in centers.
Mount through a 1 3/8" (34.9 mm) diameter hole.
With special housing that protects terminals from road splash
Specifications:
Housing: Plated steel
Circuitry: 4
Input Terminals: Brass
Contact Material: Screw
|
20.57 |
|
|
2 Pole Plug & Socket Connector with Rubber Cap
Polarized connector pair meant for marine applications. Completed assembly with male and female connectors, this ships without leads and requires wire insertion and termination before installation.
Specifications:
Housing: Black thermoplastic
Circuitry: 2
Input Terminals: Brass
Contact Material: Screw
|
18.86 |
|
|
Single Pole Brass Marine Battery Switch - 175 Amp - Continuous 1000 Amp Intermittent
Marine-Grade UL-Listed master disconnect switches.
Features:
Voltage: 6-36 Vdc
Electrical Ratings*: 250A at 6Vdc, 125A at 12Vdc intermittent, 40A at 6V, 20A at 12V continuous*
Number of Positions: 2
Positions: Off-On
Circuitry: Single-Pole
Case: Brass
Contacts: Silver or Brass
Actuator: Lever
|
51.94 |
|
|
Single Pole Brass Marine Battery Switch - 175 Amp - Continuous 800 Amp Intermittent
Marine-Grade UL-Listed master disconnect switches.
Features:
Voltage: 6-36 Vdc
Electrical Ratings*: 250A at 6Vdc, 125A at 12Vdc intermittent, 40A at 6V, 20A at 12V continuous*
Number of Positions: 2
Positions: Off-On
Circuitry: Single-Pole
Case: Brass
Contacts: Silver or Brass
Actuator: Lever
|
61.21 |
|
|
Single Pole Brass Battery Switch with Faceplate 175 Amp Continuous 800 Amp Intermittent
Marine-Grade UL-Listed master disconnect switches.
Features:
6-36 VDC
175 Amp Continuous 800 Amp Intermittent
2 Positions
Off-On Positions
Single-Pole Circuitry
Brass Case
Lever Actuator
|
55.81 |
|
|
Heavy Duty Toggle Switch DPST On-Off 4-Screw
Cole Hersee's Heavy Duty DPST Toggle Switch, 4 Screw Terminals, 25 A Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.
|
10.81 |
|
|
3 Position Sealed Ignition Switch
An extensive series of ignition switches that can also be used as rotary switches.
Made of rugged engineering grade plastic, these switches stand up to mechanical shock and vibration, and will not corrode or rust. Has an integral Deutsch-type socket to make electrical connection quick and easy, and to exclude moisture and dust.
UL-recognized. tested to SAE J259 for ignition switches.
Suitable for a broad range of voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC.
Contacts are sealed front and back to IP67 (with connector installed).
Many options available: 2- 3- or 4-position, with keys or actuator; with or without boot, various key code options, with or without anti-restart or spring return.
Some options (2 keys are provided with each keyswitch):
Single tumbler key code only - all locks are identical
Mixed key codes
200 random key codes
10 mixed key codes
10 random key codes
Soft touch knob 81397
No lock, no knob. Switch has 1/4" D-shaft only, to accept customer's knob
Chrome-plated diecast lever 81254 instead of lock
|
41.66 |
|
|
3 Position Brass Ignition Switch
Marine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off.
|
40.51 |
|
|
3 Position Brass Ignition Switch with Rubber Boot
Marine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off.
|
45.98 |
|
|
3 Position Plastic Body Ignition Switch
15A rugged plastic ignition switches for marine applications.
Impact-resistant body cannot ruse or corrode. Ignition switches operate similarly to traditional switches: "Run" position actuates radio, radar, blower, lights and other accessories. Fits most OEM applications with a standard 7/8" mounting hole.
Ratings at 6-36V DC: 15A Ignition, 5A Start
Key is removable only in the Off position. Spring return to Ign.
3 nickel-silver screw terminals
Durable plastic case and stem with PVC boot for added weather protection
Mounting stem fits panels up to 7/8: (22.2mm) thick, with 7/8" diameter hole
Fits many boats, including Baja, Celebrity, Chapparral, ChrisCraft, Luhrs, larson, FourWinns, Crest5liner, Mariah, Powerquest, Rinker, S2 Yachts, Silverton Yacht, Thompson, Thunderbird (Formula), Wellcraft
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.57 |
|
|
3-Position Heavy-Duty Ignition Switch
Ignition Switches are designed for universal applications within harsh environments. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle.
The 956 Heavy Duty Series is our most robust series of Ignition Switches, providing reliable circuit control for vehicle ignition.
Features:
Key removable in “Off” Position Only (where actuator applicable)
Ignition Proof to SAE J259
5 screw terminals
Coded lock and keys
Gasket-sealed, Shutter lock seal, O-ring seal in the stem
Ground terminal
1"-24 bushing
Off-Ign/Acc-Ign/Start. Spring return to Ign/Acc. Key removable at Off
Ratings at 12V DC: 10A Accessory, 10A Ignition, 5A Start, 1A Ground
Specifications:
Current Rating (Continuous) in Amps: 10
Positions: 3
Actuator: Hencol Key
Input Terminals: 4 Screw
Housing: Plated Steel
Contact Material: Bronze
Recommended Torque: Off - Ign/Acc - Start with Spring Return to Ign and Start Lockout
|
41.99 |
|
|
Deluxe Trailer Tie-Down - 2" x 3' - Pair
This deluxe 2" x 3' trailer tie-down is our finest over-center locking buckle with wrap around buckle protection that is proven to stay clamped under the worst road conditions. It features American made heavy vinyl coated top hook and zinc plated bottom hook. 1,700 lb. capacity - sold in pairs.
|
31.09 |
|