ModuLite® HD Protector with Integrated Circuit & Overload Protection & 5-Flat Connector for Backup Light or Surge Brake Lockout Circuit  Features: The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit and 4.2 amps for Back-Up circuit Draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off Will work with either LED/Incandescent bulbs (vehicle & trailer) Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps Designed not to send feedback thru the vehicle circuits The trailer brakes will override the hazard lamps when the brake is activated The taillight circuit has been upgraded to work with vehicles that use a pulse width modulation (PWM), this will allow the converter to turn on fully and gives the trailer lights full brightness during activation Will work with most vehicles that have a multiplex system for lighting Will not work with vehicles with low-side switch Integrated 5-flat electrical wiring connector. Fifth circuit added for surge brake lockout or backup light circuit on trailers (some units will come with a 5-way cap. Mounting bracket sold separately) Can be used on a 2 wire or 3 wire system All solid-state components in potted encapsulation Includes integrated protective cover WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4-Way Flat Connector for Rewiring Trailer - 20' Wire Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size, and capability, but no matter what the trailer's electrical functions are, a solid connection to keep the power flowing and ensure safety on the road is needed. CURT electrical connectors are designed and manufactured to give a reliable connection every time plugged into a trailer. This 4-way flat connector is designed to supply power for tail lights, turn signals, and brake lights, as well as a ground connection. It features durable rubber-molded construction and includes 20' of standard color-coded bonded wire and all necessary installation hardware to easily splice into a trailer's wiring system. This 4-way flat connector is a male-end plug, specifically designed for the trailer side of the connection. It is compatible with all 2-wire vehicle systems. Features: Perfect for rewiring a trailer using the existing taillights Provides a replacement connection to the vehicle socket The 4-way flat output connects tail lights, brake lights, and turn signals Constructed with bonded wires and durable molded rubber Features 20' of color-coded wire to accommodate most non-commercial trailers Specifications: Electrical Component Location: Trailer Hub Warehouse: D25 Part Type: 4-Way Connector Product: 4-Way Flat Connector Warranty: One-year limited warranty  *Includes two protectors and two dust covers

4-Way Flat Connector Plug with 12” Wires Trailer Side Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size, and capability, but no matter what the trailer's electrical functions are, a solid connection will keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give a reliable connection every time a trailer is plugged in.  This 4-way flat connector is designed to supply power for tail lights, turn signals, and brake lights, as well as a ground connection. It features durable rubber-molded construction and is made with 12" of standard color-coded, bonded wire to easily splice into a trailer's wiring system. This 4-way flat connector is a male-end plug, specifically designed for the trailer side of the connection. It is compatible with all 2-wire vehicle systems.  Features: Splices into trailer wiring to provide a connection to the vehicle socket The 4-way flat output connects taillights, brake lights, and turn signals Constructed with bonded 16-gauge wires and durable molded rubber Features 12" of color-coded wire for easier installation Designed for use on vehicles and trailers with two-wire systems Specifications: Electrical Component Location: Trailer Hub Warehouse: D25 Part Type: 4-way connector Product: 4-way flat connector  Warranty: One-year limited warranty

4-Way Flat Connector Plug & Socket with 72” Wires Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size, and capability, but no matter what the trailer's electrical functions are, a solid connection will keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give a reliable connection every time a trailer is plugged in.  This 4-way flat connector is designed to supply power for tail lights, turn signals, and brake lights, as well as a ground connection. It features durable rubber-molded construction and is made with 72" of standard color-coded, bonded loop wire to easily splice into a vehicle's wiring system. It includes both a vehicle end and a trailer end and can be cut to splice into existing wiring or left as a loop to serve as a useful extension harness. It is compatible with all 2-wire vehicle systems. Features: Splices into existing wiring to provide connections for both vehicle and trailer Looped wire can also be used as a wire extension for an existing connector The 4-way flat output connects tail lights, brake lights, and turn signals Constructed with bonded 16-gauge wires and durable molded rubber Features 72" of color-coded wire for easier installation Designed for use on vehicles and trailers with two-wire systems Specifications: Electrical Component Location: Vehicle/trailer Hub Warehouse: D25 Part Type: 4-way connector Product: 4-way flat connector Warranty: One-year limited warranty

 4-Way Flat Connector Plug & Socket with 12” Wires Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size, and capability, but no matter what the trailer's electrical functions are, a solid connection will keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give a reliable connection every time a trailer is plugged in.  This 4-way flat connector is designed to supply power for taillights, turn signals, and brake lights, as well as a ground connection. It features durable rubber-molded construction and is made with 12" of standard color-coded, bonded loop wire to easily splice into a vehicle's wiring system. It includes both a vehicle end and a trailer end and can be cut to splice into existing wiring or left as a loop to serve as a useful extension harness. It is compatible with all 2-wire vehicle systems.  Features: Splices into existing wiring to provide connections for both vehicle and trailer Looped wire can also be used as a wire extension for an existing connector The 4-way flat output connects taillights, brake lights, and turn signals Constructed with bonded 16-gauge wires and durable molded rubber Features 12" of color-coded wire for easier installation Designed for use on vehicles and trailers with two-wire systems Specifications: Electrical Component Location: Vehicle/trailer Hub Warehouse: D25 Part Type: 4-way connector Product: 4-way flat connector  Warranty: One-year limited warranty

2-wire flat connector. 16 GA, 2-Plugs. Ready-wired #E301120.

SC113 PowerTower® Port Light Bar w/Integrated 360° White LED Light Scanstrut integrated light mount comes pre-fitted with a LED 360° all-round white light. Compatible With: Scanstrut aft leaning PowerTower® radar mounts Features: Perfect anchor / steaming light upgrade All mounting holes predrilled for easy retrofit installation No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Range 2NM Input Voltage - 12V Material - 316 Stainless Steel Height - 17" (431mm) Mount Position - Port side In the Box: Light bar LED 360° all-round light - White Instruction manual *Sold as an Individual

APT-LB-L1 PowerTower® Central Light Bar w/Integrated 360° White LED Light Maximize your Navlight performance.  Integrated light mount comes pre-fitted with a LED 360° all-round white light. Compatible With: Scanstrut aft leaning PowerTower® radar mounts Features: Perfect anchor / steaming light upgrade All mounting holes predrilled for easy retrofit installation No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Range 2NM Input Voltage - 12V Material - Aluminum Height - 15.9" (404mm) Mount Position - Center In the Box: Light bar LED 360° all-round light - White Instruction manual *Sold as an Individual

Powertech Male Connector f/Autopilot to ORF Hose Typical Application: Used when connecting an Autopilot to Powertech System - Autopilot to ORF Hose

Groco Wsc-80 12V Self Prime Hd Wps W/Pst-1  

Medium Tough-Claw™ Base w/Double Socket Arm & 1.5" Round Base Adapter The RAP-404-202U consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Series 5 Flat Base/Alum Cheek/Delrin Sheave Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.  Specifications: Sheave Diameter 2" (51 mm) Max. Line 7/16" (11 mm) Length 3-5/8" (92 mm) Width 2-7/32" (57 mm) Height 7/8" (22 mm) Fasteners (4) #10 RH (5 mm) C/C 3" (76 mm) SWL 1750 lbs. (795 kg) Weight 5.9 oz. (167g) Max. Line 7/16" (11mm)

Series 5 Flat Base Cheek Block - Stainless Steel Cheeks Series 5 Cheek Block with Stainless Steel cheek. Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.  Specifications: Sheave Diameter 2" (51 mm) Max. Line 7/16" (11 mm) Length 3-5/8" (92 mm) Width 2-7/32" (57 mm) Height 7/8" (22 mm) Fasteners (4) #10 - RH (5 mm) C/C 3" (76 mm) SWL 1750 lbs. (795 kg) Weight 6.9 oz. (196 g) Max Line 7/16" (11mm) 

Nylon Circuit Breaker Panel - 5 Circuit - Wave Style The Wave Rocker Switch Breaker Panel features five ignition protected, illuminating SPST On/Off rocker switches and five thermal resettable breakers (two 3A, two 5A, one 8A, and one 10A). Individual circuit 10A max. 30A total. Includes a sheet of 20 preprinted decals to customize to your specific application. Label decals are back lit with green LEDs. Constructed of injection molded nylon. Installs with six fasteners (not included). 12VDC.

LL-C 5" Flush Cover f/Globemaster, Super Yacht & SuperSport Flush Mount Compasses - White Protective cover for Globemaster, Super Yacht and SuperSport flush mount compasses (must have low level lighting). For: FB-500, SF-500, SS-5000, SS-5000W, SY-500LL, and SY-500LLC Approx. Shipping Weight: 1lb