|
Low-Pressure Verifier Gauge
Easily and accurately read the exact pressure of your SUP, boat, or other inflatable. Connects to standard high-pressure HR valves. For low pressure up to 9 PSI.
|
9.88 |
|
|
High-Pressure Verifier Gauge
Easily and accurately read the exact pressure of your SUP, boat, or other inflatable. Connects to standard high-pressure HR valves. For high pressure up to 20 PSI.
|
9.88 |
|
|
Low Pressure Cyclone Centrifugal Pump - 12V
Silent running. Single tool servicing. 2m (6 foot) suction lift when wet.
A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations.
Features:
Heavy duty robust design
Stainless steel construction
Long life DC motor
Silent running
Anti-clog impeller design
Long life mechanical seal
Single tool servicing
Specifications:
Pump Body: Stainless Steel
Port Size: 3/4" pipe threads, available with NPTF threads
Flow: 110 Liters/Minute (29.7 gallons/min.)
Pressure: Up to 0.6 bar (8.7psi)
Impeller: Stainless Steel Anti-Clog Impeller Design
Shaft Seal: Mechanical
Maximum Current: 9 Amp
Fuse Size: 10 Amp
Motor: Continuously rated
Motor life 3500 hours
ISO 8846 Marine and USCG Regulations for Ignition Protection
ISO 8849 Marine Bilge Pump Standard
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
408.82 |
|
|
Low Pressure Cyclone Centrifugal Pump - 24V
Silent running. Single tool servicing. 2m (6 foot) suction lift when wet.
A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations.
Features:
Heavy duty robust design
Stainless steel construction
Long life DC motor
Silent running
Anti-clog impeller design
Long life mechanical seal
Single tool servicing
Specifications:
Pump Body: Stainless Steel
Port Size: 3/4" pipe threads, available with NPTF threads
Flow: 110 Liters/Minute (29.7 gallons/min.)
Pressure: Up to 0.6 bar (8.7psi)
Impeller: Stainless Steel Anti-Clog Impeller Design
Shaft Seal: Mechanical
Maximum Current: 4.5 Amp
Fuse Size: 7 Amp
Motor: Continuously rated
Motor life 3500 hours
ISO 8846 Marine and USCG Regulations for Ignition Protection
ISO 8849 Marine Bilge Pump Standard
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
418.42 |
|
|
LPG (Propane) Low Pressure Connection Kit
This preassembled, leak tested, hose allows you to connect your Magma gas grill to a pre-regulated, low pressure LPG (Propane) fuel system.
*Must be used with Magma Valve
In the Box:
One (1) Brass 3/8" flare fitting
10' (3 M) Hose
*Sold as an Individual
|
33.76 |
|
|
LPG (Propane) Low Pressure Valve for 12" x 24" Grills
This low pressure control valve is designed to convert your Magma grill from a Type 1 control valve/regulator and 1-lb propane fuel canister to any pre-regulated, low pressure, on-board LPG (propane) system.
Stainless steel and brass control valve connects to the systems low pressure side of the regulator.
*Must be used with Magma Connection Kit
Compatible With:
Magma 12" x 24" Rectangular grills
*Sold as an Individual
|
33.76 |
|
|
Low-Pressure Valve Kit
The Low-Pressure Valve Kit allows grills with a quick-connect burner to convert from high to low-pressure applications.
Compatible With:
Kuuma 160 Series Grills
Features:
Quick-Connect style fitting
3/8 SAE inlet
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
58.31 |
|
|
Flojet 03710-A42A Mpu 115V
Self-Priming Low Pressure Triplex Pump - 60 PSI, 2.0 GPM, 115 VAC
This is a triplex pump constructed with materials that handle a variety of chemicals. Provides a maximum flow rate of 2.0 GPM and a maximum of 60 PSI. Can run dry without damage for a period of time.
Compact Demand Pump
Flojet's 03710A42A is constructed with materials that are compatible with a wide range of chemicals. Has the ability to run dry without harm. Features an internal bypass for smooth running even at low flows. Well-suited for spraying, misting, filtration, cooling, dispensing and pressure boosting. Requires 115 volt AC power.
Specifications:
Open Flow: GPM 2.0
Switch Pressure: PSI 60
Check Valve: Viton¨
Diaphragm: Santoprene¨
Voltage: 115 AC
Duty Cycle: Intermittent
Applications:
Liquid Transfer
Spraying
Cooling
Circulation
Filtration
Dispensing
|
268.27 |
|
|
LPG (Propane) Low Pressure Valve for 12" x 18" Grills
This low pressure control valve is designed to convert your Magma grill from a Type 1 control valve/regulator and 1-lb propane fuel canister to any pre-regulated, low pressure, on-board LPG (propane) system.
Stainless steel and brass control valve connects to the systems low pressure side of the regulator.
*Must be used with Magma Connection Kit
Compatible With:
Magma 12" x 18" Rectangular grills
*Sold as an Individual
|
33.76 |
|
|
LPG (Propane) Low Pressure Valve for 9" x 18" and Kettle Grills
This low pressure control valve is designed to convert your Magma grill from a Type 1 control valve/regulator and 1-lb propane fuel canister to any pre-regulated, low pressure, on-board LPG (propane) system.
Stainless steel and brass control valve connects to the systems low pressure side of the regulator.
*Must be used with Magma Connection Kit
Compatible With:
Magma 9" x 18" Rectangular grills
Magma Kettle grills
*Sold as an Individual
|
33.76 |
|
|
LPG (Propane) Low Pressure Valve for 9" x 12" Grills
This low pressure control valve is designed to convert your Magma grill from a Type 1 control valve/regulator and 1-lb propane fuel canister to any pre-regulated, low pressure, on-board LPG (propane) system.
Stainless steel and brass control valve connects to the systems low pressure side of the regulator.
*Must be used with Magma Connection Kit
Compatible With:
Magma 9" x 12" Rectangular grills
*Sold as an Individual
|
33.76 |
|
|
LPG (Propane) Low Pressure Hose Conversion Kit
Used in conjunction with a low pressure valve, this kit allows you to connect your Magma gas grill to any pre-regulated, on-board, low pressure LPG (propane) fuel system.
*Must be used with Magma Valve
In the Box:
One (1) Brass 3/8" flare fitting
One (1) Safety shut-off valve
10' (3 M) Hose
*Sold as an Individual
|
67.50 |
|
|
CNG (Natural Gas) Low Pressure Control Valve - Low Output
This low pressure control valve is designed to convert your Magma grill from a Type 1 control valve/regulator and 1-lb propane fuel canister to any pre-regulated, low pressure, on-board CNG (natural gas) fuel system.
Stainless steel and brass control valve connects to the systems low pressure side of the regulator.
*Must be used with Magma Connection Kit
Compatible With:
Marine Kettle® Gas Grills and Rectangular Grills with 9" x 18" Grilling Surface
*Sold as an Individual
|
33.76 |
|
|
CNG (Natural Gas) Low Pressure Control Valve - Medium Output
This medium pressure control valve is designed to convert your Magma grill from a Type 1 control valve/regulator and 1-lb propane fuel canister to any pre-regulated, low pressure, on-board CNG (natural gas) fuel system.
Stainless steel and brass control valve connects to the systems low pressure side of the regulator.
*Must be used with Magma Connection Kit
Compatible With:
Rectangular Grills w/ 12" x 18" Grilling Surface
*Sold as an Individual
|
33.76 |
|
|
CNG (Natural Gas) Low Pressure Control Valve - High Output
This high pressure control valve is designed to convert your Magma grill from a Type 1 control valve/regulator and 1-lb propane fuel canister to any pre-regulated, low pressure, on-board CNG (natural gas) fuel system.
Stainless steel and brass control valve connects to the systems low pressure side of the regulator.
*Must be used with Magma Connection Kit
Compatible With:
Rectangular Grills with 12" x 24" Grilling Surface
*Sold as an Individual
|
33.76 |
|