Portable 12VDC Air Pump with 3 Tips Features: Includes 3 Tip Options 12VDC Portable Air Pump Color: Blue

Aqua Jet Wash Down Pumps The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before. As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before. Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package. CE-Approved Features: Whisper quiet operation Five-chamber construction Self-priming Easy, low cost maintenance Quick-connect hose or threaded connectors available Inline strainer and trigger nozzle included as standard Long service life Capacity:11 l/min - 2.9 GPM Pressure Cut Off: 2.8 bar - 41 psi Fuse Size: 10 A Connection:3/8" BSP x +" barb / +" NPT x ?" barb Motor: WD 2.9 - 90 W, 12/24V DC Body: PA/PPA Valves: Nitrile Diaphragm: Santoprene

Johnson 10-13406-103 Series 4.0 Aqua Jet Water Pressure System Johnson Pump 10-13406-103 Aqua Jet 4 GPM Water Pressure Pump. The new generation of WPS pumps - 12V DC. Quiet and pulsation-free even at low speeds, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats. WPS 3.5 fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise.   4.0 GPM Aqua Jet Water Pressure System Pump 12 volt DC operation Smooth and pulsation free flow due to five chamber design Lower noise and water pulsation characteristics when compared to conventional three or four chamber diaphragm pumps Designed to use with an accumulator tank Capacity: 4 GPM Pressure Cut in: 24 PSI Pressure Cut off: 41 PSI Fuse Size: 10 amp Connection: 3/8 in. NPT/hose 1/2 in. 1/2 in. NPT /hose 3/4 in. 1/2 in.-14NPSM Motor: 100W Length: 9.46 in. Width: 8.42 in. Height: 4.33 in.   Johnson 10-13406-103    4.0 Aqua Jet Water Pressure System 12V  

2-Stage High Volume High-Pressure Digital Pump with Car/Battery Adapter Kit The fastest way to inflate HPI items to full pressure. Two separate ports for inflation and deflation. LED digital gauge display & auto-stop function when set to desired PSI. Equipped with 12V DC accessory outlet cable & car battery adapter kit. The nozzle is compatible with HR valves only. Maximum pressure of 20 PSI. Features: The fastest way to inflate HPI items to full pressure Automatic inflate and deflate functionality LED digital gauge and auto-stop function Equipped with 12V accessory outlet cable and car battery adapter kit Compatible with HR valves only 20 PSI max pressure

1.1 PSI Air Pump with Hose & Fittings Features: Inflates and Deflates Equipped with 12v cigarette outlet adapter  Comes with several fittings for all applications Includes special Halkey Roberts adapter to fill party bumpers (M3001) (M3002) (M3030) *Do NOT use to fill with water or get wet.  **When inflating do not cover the intake hole.

Aqua Jet Wash Down Pumps The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before. As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before. Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package. CE-Approved Features: Whisper quiet operation Five-chamber construction Self-priming Easy, low cost maintenance Quick-connect hose or threaded connectors available Inline strainer and trigger nozzle included as standard Long service life Capacity:20 l/min - 5.2 GPM Pressure Cut Off: 5 bar - 70 psi Fuse Size: 20 A Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb, Motor: WD 5.2 - 185 W, 12/24V DC Body: PA/PPA Valves: Nitrile Diaphragm: Santoprene

March 809 815 Series Mag-Drive Centrifugal Pumps The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.   March Pump Mag-Drive Centrifugal Pump Bronze with Base 24VDC High Speed 7.5GPM 1/2"MPT Ports  

Oberdorfer N991-32-C82-W Brz Gear Pump W/12/24V Mtr  

Oberdorfer 994-W 994 Gear Pump Painted White  

Aqua Jet Wash Down Pumps The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before. As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before. Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package. CE-Approved Features: Whisper quiet operation Five-chamber construction Self-priming Easy, low cost maintenance Quick-connect hose or threaded connectors available Inline strainer and trigger nozzle included as standard Long service life Capacity:13 l/min - 3.5 GPM Pressure Cut Off: 5 bar - 70 psi Fuse Size: 15 A Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb, Motor: WD 3.5 - 120 W, 12/24V DC Body: PA/PPA Valves: Nitrile Diaphragm: Santoprene

Sherwood G-2903X-J-W Engine Cooling Pump Painted

March Mag-Drive Centrifugal Pumps Bronze Center Inlet 12VDC 5.5GPM     The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.     March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 12VDC 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet  

March 809 BRC HS 12VDC Mag-Drive Pump March Mag-Drive Centrifugal Pumps Bronze 12VDC High Speed 5.5GPM   The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.   March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 12VDC High Speed 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet  

Primetime Pump 24VDC The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm).   Applications Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, or RO pre pump and it is Marine ignition protected motors (ISO 8846) Agricultural pump Industrial pump   SPECIFICATIONS: Flow Up to 21 GPM Head Feet Up to 23’ Housing 316 Stainless Steel (Investment Cast) Cover 316 Stainless Steel Impeller 316 Stainless Steel Semi-Open Wearplate 316 Stainless Steel Mechanical Seal Carbon / Ceramic / Viton Bellows O-ring Flapper Viton Weight 13 lbs Motor is painted White

Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.    March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower air cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.      Unit System 60Hz 50Hz Max Flow 30 GPM 102 LPM Max Head 41 FT 9 M Power .33 HP .248 KW Electrical 1PH 115/230V                   3PH 230/460V 50/60HZ   Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)