|
Inboard HD Flush Buddy
Easy to use inboard motor flusher. Great for winterizing, maintenance or anytime you need to run your inboard engine while out of the water. Just connect the garden hose, fit the cup over the water intake and extend the leg sealing cup to the hull. Constructed of aluminum and heavy duty rubber. Conveniently adjustable from 19" to 30-1/4".
|
50.94 |
|
|
Inboard Motor Flush
Molded Rubber/Aluminum
Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine’s service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg to seal the cup to the hull. Fresh water flushes the cooling system, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an inboard engine out of the water.
|
17.40 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Designed for inboards, performance ski boats and all boats with a thru-hull water intake. Stainless steel T-fitting slides into intake slot in either direction for quick fitting connection. 360° plastic support ring for tight fit to bottom of boat. Eliminates the need to fit between trailer bunks and secure a pole to the ground. Locking nut ensure that flusher is secure. Standard garden hose attachment.
|
47.99 |
|
|
MDM Pumps G1.SEAL FLUSH KIT Plan 11 Or 13
|
197.15 |
|
|
Yamada K80-AM-DP-HD Air Motor Reseal Kit
THE DP-80-HD AIR MOTOR RESEAL KIT CONTAINS,
(8) 640007 O'Ring
(2) 640023 O'Ring
(2) 640133 O'Ring
(2) 640134 O'Ring
(2) 640138 O'Ring
(2) 684537 Spring
(2) 773066 Throat Bearing
(1) 773047 Center Rod Guide
(2) 773040 Gasket
(2) 773041 Gasket
(4) 773067 Bushing
(2) 700231 Pin
|
353.60 |
|
|
Cable Buddy
Cable Buddy™ is a complete steering cable lubricant system.Seals moisture out, puts lubricant in. Prevents corrosion and freezing to -40°F (-40°C). Cable Buddy lubricates and virtually eliminates all wear in the inner cable, where most problems occur. Works on inboard, outboards, and inboard/outboard steering cables. Fits all major US and foreign motors (7/8" x 14 pitch threads). Easy to install.
Includes the stainless steel Cable Buddy Nut with plug and sealing washer, oiling tube assembly, and Max-Lube, the ideal lubricant for steering cables. Cable Buddy comes with 1 lube nut and Max-Lube.
|
36.00 |
|
|
Flush Pro Valve - 5/8"
Finally! Fresh flushing of your inboard is as simple as connecting a garden hose.
Features:
Polymer
Stainless Steel Spring
Flush your boat engine safely and easily
Transparent body allows for visual inspection of water flow
Durable check valve system activated by water pressure from a garden hose
Check valve automatically shuts off hull intake when water pressure is applied
Adapter supplied with Flush Pro make winterizing your boat easy
Can be used with on board generators
Available for Standard 5/8" Hose Sizes
|
112.32 |
|
|
Flush Pro Valve - 1"
Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose.
Features:
Polymer
Stainless Steel Spring
Flush your boat engine safely and easily
Transparent body allows for visual inspection of water flow
Durable check valve system activated by water pressure from a garden hose
Check valve automatically shuts off hull intake when water pressure is applied
Adapter supplied with Flush Pro make winterizing your boat easy
Can be used with on board generators
Available for Standard 1" Hose Sizes
|
112.32 |
|
|
Flush Pro Valve - 1-1/4"
Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose.
Features:
Polymer
Stainless Steel Spring
Flush your boat engine safely and easily
Transparent body allows for visual inspection of water flow
Durable check valve system activated by water pressure from a garden hose
Check valve automatically shuts off hull intake when water pressure is applied
Adapter supplied with Flush Pro make winterizing your boat easy
Can be used with on board generators
Available for Standard 1-1/4" Hose Sizes
|
112.32 |
|
|
Flush Pro Valve Kit - 5/8"
Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose.
Features:
Polymer
Stainless Steel Spring
Flush your boat engine safely and easily
Transparent body allows for visual inspection of water flow
Durable check valve system activated by water pressure from a garden hose
Check valve automatically shuts off hull intake when water pressure is applied
Adapter supplied with Flush Pro make winterizing your boat easy
Can be used with on board generators
Available for Standard 5/8" Hose Sizes
Kit Includes:
Water Inlet Fitting (Part #0499)
|
188.39 |
|
|
Flush Pro Valve Kit - 1"
Finally! Fresh flushing of your inboard is as simple as connecting a garden hose.
Features:
Polymer
Stainless Steel Spring
Flush your boat engine safely and easily
Transparent body allows for visual inspection of water flow
Durable check valve system activated by water pressure from a garden hose
Check valve automatically shuts off hull intake when water pressure is applied
Adapter supplied with Flush Pro make winterizing your boat easy
Can be used with on board generators
Available for Standard 1" Hose Sizes
Kit Includes:
Water Inlet Fitting (Part #0499)
|
188.39 |
|
|
Flush Pro Valve Kit - 1-1/4"
Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose.
Features:
Polymer
Stainless Steel Spring
Flush your boat engine safely and easily
Transparent body allows for visual inspection of water flow
Durable check valve system activated by water pressure from a garden hose
Check valve automatically shuts off hull intake when water pressure is applied
Adapter supplied with Flush Pro make winterizing your boat easy
Can be used with on board generators
Available for Standard 1-1/4" Hose Sizes
Kit Includes:
Water Inlet Fitting (Part #0499)
|
188.39 |
|
|
Winterizing Your Boat
When the boating season is winding down, it's time to start thinking about protecting your valuable recreational asset. The time and effort you spend now will have a definite effect on your boat's performance, or lack of it, and certainly save you time, effort and money come spring. You should remember that your insurance policy may not cover damage done by lack of maintenance or neglect.
The best place for your boat to be during the winter is out of the water, under cover, in a climate-controlled boat storage area. This, however, can be expensive. If don't have this option perhaps you should consider shrink-wrapping your boat. This, too, is a little expensive but provides a very protective cover. Short of these two items, make sure that your boat is well covered with a tarp or some other sturdy cover.
Your first step in winterizing should be to make a checklist of all items that need to be accomplished. Check the owner's manual of both your boat and motor for manufacturer's recommendations on winterization. If you are a new boat owner, perhaps you should employ the assistance of a friend with experience in winterizing or hire a professional to do the job.
CLR Marine sells the winterizing products you will need for winter storage and regular maintence of your boat.
Specials Closeouts Remanufactured Rebates
|
|
|
Winterizing Boat Supplies
Preparing your boat for winter can take time and effort, but with the right supplies it is much faster and easier. We offer a full range of winterizing boat supplies, including water flushing systems, oil change systems, and more. Come to us for all your winter covers, and de-icers, and make sure you remember your cleaning supplies. Getting your boat clean before you store it away for the cold weather months can help protect the finish and get things going faster in the springtime. We offer options for battery management, along with trailer winches and other trailer accessories.
If you need heaters/dehumidifiers to protect your boat while it is being stored in the wintertime, we can help with that, as well. And be sure you remember to pick up any repair manuals you might need. The winter months are a great time to work on your boat, so it will be ready when the weather warms up and boating season begins again. With the right winterizing boat supplies and cleaning options from brands like Powerhouse, Davis Instruments, Jabsco, Shurhold, Swobbit, and more, you will be on your way to thoroughly protecting your boat when the temperature drops.
|
|