|
Marine Plumbing & Ventilation
The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.
We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.
|
|
|
BERKELEY S15094, SET OF PACKING RINGS
|
258.44 |
|
|
Ampco Pumps P1SX015098006 17-4 Sleeve
|
42.53 |
|
|
Date: March 1, 2011
Field Notice Number: 311-C11
Models or Product Affected: Cruisair & Marine Air Systems
Immediate Action Is Required In Order To Avoid Damage To Your Vessel
Please see these two PDF's
311-C11_POE-Oil-With-CPVC-Plumbing
301-F10_Antifreeze Mandatory For Chillers
|
|
|
ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8"
ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight.
They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate.
Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
An aluminum counter flange and a mosquito screen are available for these hatches.
Features:
External Dimensions - 13 1/8" x 13 1/8"
Cut Out Dimensions - 10 1/4" x 10 1/4"
Number of Handles - 1
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
285.84 |
|
|
Turning Point Hub Kit: 509
Features
Lifetime Warranty
Never buy another hub kit system again
Inner splines adapt to the engine
Outer hub compatible with different props
Reduce gear shock & engine/drive damage
Save up to 30% when purchasing a replacement prop
Eliminate propeller vibration & chatter
Eliminate hub cracking & failure
Corrosion resistant materials - brass splines
Reduce gear shock & engine/drive damage
Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value.
Also adapts to all Michigan Wheel® and Mercury® interchangeable propellers
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.39 |
|
|
MAGNUS Ventilation Hatch - OD 12-5/16" x 12-5/16"
Heavy Duty Ocean Hatch
MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck.
These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are currently in the market.
Features:
External Dimensions - 12 5/16"" x 12 5/16"
Cut Out Dimensions - 10 1/4" x 10 1/4"
Number of Handles - 1
*VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
317.52 |
|
|
Cowl Ventilator
Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.
For use with 3" I.D. wire-supported ventilation hose. Features flexible hose flange that is screwed onto hose, then vent snaps onto the flange. Vent constructed of chrome-plated die-cast Perma-Plate® ZAMAK. Flange is non-corrosive plastic. Installs with #8 screws.
Installation Hole Size: 3-1/4" to 3-1/2"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.49 |
|
|
Closable Deck Ventilator Type
The UFO2 is a high-gloss polished deck ventilator with an integral mushroom ventilator that can be made watertight. When opened, it ensures ventilation and is rain- or splash-proof.
Specifications:
Material: Stainless steel
Hose Connection Diameter (mm): N/a
Free Flow Area cm²: 30
Sort Ventilator: 0
|
118.80 |
|
|
Please, i've look everywhere, and came up with no luck. If someone could help mate find his map of the California delta. It for a Garmin 180 G chart MGUS509ss. It takes you from San Francisco to Sacramento California. Thank you.
|
|
|
Little Giant Mag-Drive Pump 582509
Little Giant 4-MDIX-SC Magnetic Drive Pump
Motor 115 Volt 50/60Hz 1/10 HP Open Fan Cooled Motor, 1325 GPH at 1 Foot Head, Shutoff Head 17 Feet, Inlet: 1" FNPT, Outlet: 1" MNPT, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 6 Foot Power Cord
582509 Magnetically driven pump for semi-corrosive chemicals and solutions. The MD-SC Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use.
|
635.25 |
|
|
230V AC Main + Branch A-Series Toggle Circuit Breaker Panel
PN: 8509
White Switches
(1) 16A Double Pole Circuit Breaker Installed
(3) 8A Single Pole Circuit Breakers Installed
(1) 8246 AC Analog Micro Ammeter
(1) 8245 AC Analog Micro Voltmeter
Features:
Red reverse polarity indicating LED
All hot, neutral and safety ground buses installed, fully pre-wired
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
Maximum panel amperage - 50 Amperes
MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Industry standard height and width
Countersunk mounting holes throughout
Detailed installation instructions and cutout template included
Includes set of 30 common Large Format Labels
Over 500 individual Labels available
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
378.94 |
|
|
xSonic R509LH-W Thru-Hull Wide-Beam CHIRP w/Fairing Block
Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.
Features:
Depth & fast response water-temperature sensor
CHIRPs across the following bandwidths:
Low Frequency 28 to 60 kHz
High Frequency 150 to 250 kHz
25 internal Broadband Ceramics
Epoxy housing with stuffing tube and high-performace fairing
Boat size: 12M (40’)
Hull Type — Fiberglass, Wood, Metal
Can retrofit to existing R209 install
Exclusive Xducer ID® technology
Specifications:
Hull Deadrise: 0° to 25°
Acoustic Window: Epoxy/urethane
Weight: 20.8kg (46lb)
|
4456.65 |
|
|
R509C-LH CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4150.31 |
|
|
R509C-LHW CHIRP Transducer
Features:
Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking)
25-Internal, Broadband Ceramic Elements
Broadband / CHIRP / Spread Spectrum
Operating frequencies:
Low—Chirps from 28 kHz to 60 kHz
High—Chirps from 130 kHz to 210 kHz
Beamwidth (Adjustable):
Low—23° to 9°
High—8° to 4°
10 m (33’) cable, no connector
Fast-response water-temperature sensor
Boat size: 12 m (40’) and above
Hull Type: Fiberglass, wood, or metal
Exclusive Transducer ID®
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
4334.37 |
|